Eaton setup, and extras.

Fast69Mach

Member
Established Member
Joined
Dec 30, 2004
Messages
365
Location
antioch, ca
As much as I'd like to run this setup, it's too tall for the car it was intended for, so here it is for sale. Everything is in good condition, and I had fully intended to use every part here in my 69', but hood clearance is an issue.

Eaton supercharger - 70k miles, un ported w 2.8 pulley. Coated in high-temp silver. - $280

407158111.jpg

407158110.jpg


Stock intercooler - 70k miles - Sold

Lower intake manifold - Sold

Intercooler adapter - Sold

03 Cobra timing cover - brand new, only bolted to my motor for mock up, bolts were hand tight. - $175

407158113.jpg


407158114.jpg


Alternator idler - Sold

Cobra alternator brackets - Sold

Cobra pulley bridge - Sold

Brand new Metco 5pc idler set, bolted to the motor but never ran. - $300

407158102.jpg


Accufab SBTB and plenum - Sold

01 cobra oil cooler - Sold

Stock 03 cobra 39lb injectors 70k miles - Sold
Stock fuel rails x2 - $25 ea.

All prices are plus shipping, and I do take PayPal. If you want multiple parts I can probably make you a package deal, just ask. Don't hesitate to make a reasonable offer on parts. All parts are located in Antioch, CA.

-Matt
 
Last edited:

Fast69Mach

Member
Established Member
Joined
Dec 30, 2004
Messages
365
Location
antioch, ca
Prices updated on many parts, including the timing cover. I also just got the accufab TB I purchased off of a member here a couple weeks ago, and won't be using it so throttle body and plenum are sold together. I'm loosing money on these parts, but that's what happens when you change directions mid-build!
 

Fast69Mach

Member
Established Member
Joined
Dec 30, 2004
Messages
365
Location
antioch, ca
I'm using the AJE setup, but I also have a 2013 GT500 oil pan, so I can't drop the motor down any. Id rather run a different blower than sacrifice ground clearance.
 

Users who are viewing this thread



Top