Eaton Swap Complete For Sale

gonein11.2

New Member
Joined
Sep 8, 2004
Messages
25
Location
dallas
I bought this complete kit from Derek (95SC) back in March. I have only opened and checked off the parts once they were delivered. Then I repacked them to await my install at a later date. Now I have decided to most likely trade my Mach in on a GT500 so I need to sell this low mileage/complete kit.
Looking to get $3200.00 or BEST OFFER

[email protected]

http://www.mach1registry.org/forums/showthread.php?t=120701

Since items are boxed up I would like to avoid taking pictures, but I have attached a link to the original purchase of the exact parts I am selling. I do understand the need for verification and I am willing to send pictures for serious buyers, but it will take a day or so to unpack the items.

Payment
Cash/Money Order/Paypal

Shipping
Items are all packed well in 4 boxes. I have estimated shipping at approximately $130-150 or I am willing to meet around Dallas, TX.

Please feel free to ask any questions or make any reasonable offer.


Parts List

1 Eaton supercharger
2 Lower intake manifold
3 lower intake intercooler
4 lower intake water adapter with 2 tubes , gasket and bolts
5 Pulley bridge bracket with tensioner and 2 idlers
6 timing cover new
7 timing cover bolts, studs and nuts ,necessary to mount Eaton SC drive system
8 timing cover tensioner with an idler plus 2 idlers[1 smooth ,1 ribbed idler
9 bolts for above tensioner and idlers
10 Lower supercharger pulley with cage and idler
11 Crank harmonic balancer new
12 Idler bracket with idler - it sits where alternators sit on N/A cars
13 oil cooler with adapter
14 Alternator
15 upper and lower alternator brackets
16 Bolts for alternator and brackets
17 Alternator pigtail connector
18 Coolant crossover pipes with new O rings and temp sensor new
19 supercharger inlet plenum with bolts and gasket
20 throttle body with bolts and gasket
21 Bypass valve actuator with 2 bolts
22 IAC valve with bolts and gasket
23 supercharger pulley cover
24 EGR valve with bolts
25 EGR metal tube
26 Throttle cable new
27 Throttle/ cruise cable bracket with bolts new
28 Cruise control cable new
29 Vacuum lines
30 Black bracket with emission sensors , sits on the side of Eaton SC
31 10 lower intake to cylinder heads bolts
32 10 supercharger to lower intake bolts
33 10 supercharger to intercooler bolts
34 IAT2 pigtail connector
35 IAT2 sensor with bolts ,one on the back of Eaton SC
36 90MM Maf housing with electronics
37 intake pipe from throttle body to Maf
38 intake air box
39 SVT Focus fuel pump
40 set of 8 EV6 39lb injectors
41 lower intake connector with PCV hoses
42 complete set of heat exchanger brackets with bolts
43 Heat exchanger
44 Supercharger reservoir tank
45 complete set of rubber and hard intercooling lines
46 intercooling pump
47 intercooling pump pigtail connector
48 Intercooling pump mounting bracket
49 power steering reservoir bracket with bolts
50 Radiator hoses
51 6rib and 8rib belts
 
Last edited by a moderator:

agpatrick12

New Member
Established Member
Joined
Apr 16, 2011
Messages
474
Location
stl
Your mach1 link doesn't work bro. I think it only copied the beginning and end of the link.
 

Users who are viewing this thread



Top