Eaton Swap Parts, low miles. Many new and upgraded aftermarket parts and more

[Carbon Driven]

**** NOW PARTING OUT SWAP ****

Sure I have more I'm forgetting but pictures throughout the week as I return with the rest of my parts from the shop.
Only 520 miles on the parts as changed direction and am going with a Vortech blower setup instead for a high hp build.

*** ALL PRICES ARE + shipping + Paypal ***

I cant reply during the weekdays so I'll catch up in the evening.


Innovators West dampner/balancer (oh hold for a few weeks)
Innovators West Metco Adapter Hub: $175
Metco lower pulley kit w/ 4# lower pulley ring: $300

99-04 OEM Radiator tank w/cap: $40
99-04 oem convertable top pump: $80
99-04 OEM Ford Motor Mounts BRAND NEW! (2R3Z6038AA and 2R3Z6038AB): $80

Redfire billitflow sc pulleys (2.93, 3.10) (new): $70 ea.

Redfire candy metallic alternator brackets: $200
OEM Power steering tank: $25

Boost bypass valve: $50

Recent picture of my engine with the eaton swap installed


Some pics (click on thumbnails):

99-04 convertable top pump:



Metco and IW kit:



OEM PS Tank:

 

[2003DSGMACH1]

If you don't sell it as a kit how much do you want for the Throttle cable bracket and the Bypass valve?

Not sure if I want to sell this as a 95%+ complete kit or part it out but members wanting to buy several parts at once would at least be preferred
Sure I have more I'm forgetting but pictures throughout the week as I return with the rest of my parts from the shop.
Only 520 miles on the parts as changed direction and am going with a Vortech blower setup instead for a high hp build.

Posi race ported eaton sc
Posi port matched accufab polished plenium elbow

Innovators West 10% OD dampner
Metco lower pulley kit
Metco 4# lower pulley ring

Set of 8 Manly Premium Series Pistons for 8.5:1 CR. New with 520 miles on them.
(Changing it up with notched pistons is why changing them)

Set of 01 Cobra cams with 69K miles

Also have an BillitFlow IRS brace powdercoated redfire candy metallic (same as my valve covers) with new hardware.


Swap kit:
--------------------------
Stock non-ported eaton sc
Bypass valve
ERG delete plate
EGR valve
EGR metal tube
Smog bracket attaches on side of eaton
Sensors to go on bracket above
Vacuum lines that go on the side of the eaton. Its the very last set in existance new ford oem (new)
Partial set of vacuum lines for an EGR delete setup
IAC valve and gasket
Redfire billitflow sc pulleys (2.76, 2.93, 3.10) (new)
Intercooler
Lower intake
Intercooler adapter
Intercooler adapter nipples (new)
03 timing cover powdercoated black
Tensioner that mounts on the timing cover
Tensioner on pulleybridge
SC Pulley bridge powdercoated black (new)
SC Pulley bridge bolts (new)
SC pulley bridge idler bolts (new)
Billitflow redfire idler pulleys (new)
Alternator brackets
Alternator
Intercooler tank
Intercooler pump
Intercooler pump bracket
Intercooler tank to intercooler adapter hose (new and discontinued from Ford)
Throttle cable bracket
Throttle cable
Cruise control cable
Coolant crossover
Afco DPHE (new)
Heat exchanger brackets with bolts
Heat exchanger hard lines
"S" hardlines (new)
Hoses between HE and hardlines
JLT RAI red carbon fiber with filter (new filter in box and one installed)
SCT BA3000 MAF (new)
SC belt (new)
Accessory pulleys belt (new)
Power steering bracket
Power steering tank


Recent picture of my engine with the eaton swap installed

I need to post some prices, yes, but if someone wants the swap kit send me an offer. If it doesnt sell as a kit then I'll add individule prices

 

[135 Boom]

If you part out pm me price on all the idlers and the 2.93 with the hub shipped to 73521. Pics of IRS brace and parts? Would be interested in that too.

 

[samuel]

let me know price for the intercooler please. PM me

 

[AdamSVT]

I'd love to get that posi ported blower/plenum... PM me if you decide to part.

 

[TDavis559]

Interested in the jlt rai if you decide to separate

 

[Carbon Driven]

I'll give this a couple days and then I'll start to part out. Not looking for retail on the parts but not going to give away near new parts either lol.

This will give me a few days to get the rest of the parts home and take pics and verify I have it all etc.

The parts not in the swap I can sell now as they wont affect the swap kit.

Note: I have 2 eatons in this listing. One Posi ported and one stock un-ported. Stock one probably would go with the swap but not set in stone

 

[Demonio]

How much for the intercooler adapter to tank hose? Pm me price if parting or can I get this at the dealer if u don't want to part?

 

[lobra97]

pm me on POSI as well, very interested.

 

[Carbon Driven]

How much for the intercooler adapter to tank hose? Pm me price if parting or can I get this at the dealer if u don't want to part?

Its a discontinued part. I'll possibly be parting out the swap if no bites by mid week. No reason to keep my parts honestly. The new build needs funding :beer:

 

[Carbon Driven]

Oh and if it gets parted I will do my best to give those who are first replies and serious. No waiting for next paychecks or things they are selling to sell etc. Dont think its fair to those with the funds ready and are serious. No offense just dont have time for dat right now lol

 

[Carbon Driven]

pm me on POSI as well, very interested.

I'd like to try to keep the posi and the accufab port matched plenium together.

 

[BoostedByV]

interested in posi ported blower , plenum,BillitFlow & jlt. PM me if you decide to part

 

[kzman]

i'am interested in the pistons. can you send me pic's. good pic's of the skerts and the first ring landings to [email protected] or text to my cell 262-391-7847

 

[Carbon Driven]

Picking up the pistons from the shop tomorrow. Picked up a few more parts tonight.

Working on getting ready to part this out and assign individual prices.

 

[Mystic03]

i didnt see if you are willing to seperate the metco lower kit?

 

[Demonio]

I'm in for the hose just met me know...

 

[semperfi09]

How much for the powersteering res and bracket shipped to 35096

 

[semperfi09]

And heat exchanger

 

[lobra97]

ok well how much for the posi package listed? still interested