Eaton'ed Mach #'s

[wutang61]

got the mach all dyno tuned. i had my tuner go really conservative.

timing= 12*

boost= 8lbs

416RWHP SAE

380RWTQ SAE

sure theres more power to be had if i would have advanced more timing... but id rather have less and be safer.

the car is an absolute monster with the 4.56's.

 

[brewcity_mach1]

why the 8 psi? do you have a stock bottom end?

 

[MinGry03]

I would get the a/f fixed. It seems a bit lean until 5200 rpm.

 

[wutang61]

why the 8 psi? do you have a stock bottom end?

yep. down to the cast crank shaft.

I would get the a/f fixed. It seems a bit lean until 5200 rpm.

i plan on running at least 50% 110 mixed with 93. but im thinking about just going 100% 110 octane fuel.

the car was tuned on 93.

 

[Mach Boy]

I was going to say the same as Min. The AFR looks off. Nice, safe numbers too btw.

 

[ford911]

looks great i need to do this

 

[Blk04L]

I would get the a/f fixed. It seems a bit lean until 5200 rpm.

+1