I've got an 04 Lightning that I have been running with a 6lb pulley and conservative tune for three years (no other modifications other than oil sep mod). In doing so I have used a 95mm aluminum MAF tube/housing and cone filter. Never had any trouble.
Due to the fact I tow with my truck the conical filter noise got to me. So, recently I went back to the stock air box and MAF and cut a hole in the bottom of the box along with a tube under the truck for more airflow into the stock box.
My question is the following: will I have airflow problems or "maxing out the MAF" problem using the stock air box and meter?
If I might have an issue how do the MAF extenders fix the problem and which MAF extender should I choose?
Due to the fact I tow with my truck the conical filter noise got to me. So, recently I went back to the stock air box and MAF and cut a hole in the bottom of the box along with a tube under the truck for more airflow into the stock box.
My question is the following: will I have airflow problems or "maxing out the MAF" problem using the stock air box and meter?
If I might have an issue how do the MAF extenders fix the problem and which MAF extender should I choose?