Im finishing gathering things for my TT set up, and im looking for some opinions. I just purchased a custom TT kit. The kit is a bumper mount kit like the hellion kits, but its forward facing with THP headers. It came with twin billet wheel precision 67's. I know this is a little much turbo for what im shooting for now, but it will give me room and options down the road. They are T3 turbine housings with a/r of .63. I plan of running full exhaust with e-dumps off the down pipes. I will be running a mach1/cobra intake, stock 04 heads, with a stock displacement bottom end.
Couple of things I am curious of are, opinions of some cams I have vs stock ones (which I have also), and how you think the spool time will be. (I am running a T-56)
The cams are as follows:
Exhaust Valve Lift (in.)0.45Intake Valve Lift (in.)0.475RPM Range1000-7000Int. Duration @ .050 in. (Deg)230Int. Duration Advertised (Deg)230Exh. Duration @ .050 in. (Deg)232Exh. Duration Advertised (Deg)267.
Before anyone freaks out, these are a "blower" cam but they really dont seem like they would be to bad of a fit in the reading Ive done. I am looking for more bottom and mid power, but in the same if stock cams are not going to give me a significant advantage over these then im not wasting my time swapping them.
Couple of things I am curious of are, opinions of some cams I have vs stock ones (which I have also), and how you think the spool time will be. (I am running a T-56)
The cams are as follows:
Exhaust Valve Lift (in.)0.45Intake Valve Lift (in.)0.475RPM Range1000-7000Int. Duration @ .050 in. (Deg)230Int. Duration Advertised (Deg)230Exh. Duration @ .050 in. (Deg)232Exh. Duration Advertised (Deg)267.
Before anyone freaks out, these are a "blower" cam but they really dont seem like they would be to bad of a fit in the reading Ive done. I am looking for more bottom and mid power, but in the same if stock cams are not going to give me a significant advantage over these then im not wasting my time swapping them.