I'm looking to sell my 1991 Ford Mustang LX. It is an original 5.0 5-speed car. This was built to be a track car for me, so many creature comforts have been removed. It has dash, center console, and driver seat...that's it. It has ZERO a/c components. All items, even evaporator core from behind the dash.
-UPR tubular k-member and a-arms
-Viking coilover conversion for the front struts
-Flaming River manual steering rack
-Flaming River steering shaft
-Proform electric water pump
-SVE caster camber plates
-Hurst line lock
-LMR 5-lug conversion with 31 spline axles
-FRPP 31 spline TracLoc
-unknown manufacture 3.73 rear gears
-Drake Perfomance girdled differential cover
-unknown manufacture adj. rear lower control arms
-unknown manufacture double adj. upper rear control arms
-unknown manufacture sub-frame connectors
-Chassis Engineering 10 point roll cage
-F-303 cam w/ supporting valvetrain
-unknown manufacture shorty headers
-unknown manufacture off-road mid-pipe
-unknown manufacture mufflers
-Cobra intake manifold
-unknown manufacture cold air intake
-Nitrous Outlet single nozzle kit, solenoids good for 400hp
-Weld Alumistars 17x4.5 with M&H front runners
-Weld RTS's 15x10 rears with MT 28x10.50 Pro Bracket radials
Car has bested 11.1 @ 119 in the 1320 cutting 1.4 60ft times on a 200. Car is still stock bore 302 engine backed by a ProMotion T-5 with unknown clutch. I'm located in Gulfport, MS. I have the car priced at $8,000 and I have the title in hand ready to make a deal. Please, no trade offers. I can send more pictures, videos, or answer any questions just text... (228) 697-7771 _Wayne_
-UPR tubular k-member and a-arms
-Viking coilover conversion for the front struts
-Flaming River manual steering rack
-Flaming River steering shaft
-Proform electric water pump
-SVE caster camber plates
-Hurst line lock
-LMR 5-lug conversion with 31 spline axles
-FRPP 31 spline TracLoc
-unknown manufacture 3.73 rear gears
-Drake Perfomance girdled differential cover
-unknown manufacture adj. rear lower control arms
-unknown manufacture double adj. upper rear control arms
-unknown manufacture sub-frame connectors
-Chassis Engineering 10 point roll cage
-F-303 cam w/ supporting valvetrain
-unknown manufacture shorty headers
-unknown manufacture off-road mid-pipe
-unknown manufacture mufflers
-Cobra intake manifold
-unknown manufacture cold air intake
-Nitrous Outlet single nozzle kit, solenoids good for 400hp
-Weld Alumistars 17x4.5 with M&H front runners
-Weld RTS's 15x10 rears with MT 28x10.50 Pro Bracket radials
Car has bested 11.1 @ 119 in the 1320 cutting 1.4 60ft times on a 200. Car is still stock bore 302 engine backed by a ProMotion T-5 with unknown clutch. I'm located in Gulfport, MS. I have the car priced at $8,000 and I have the title in hand ready to make a deal. Please, no trade offers. I can send more pictures, videos, or answer any questions just text... (228) 697-7771 _Wayne_
Last edited: