first 1/4 mile pass this year on nitrous

[z-eater]

It was about 40f outside and cold no sun.
My mods are, 95 mm C&L kit, Bassani x-pipe and cat-back,2.80 pulley SCT chip, Spec stage 4 clutch, and NX kit 100 shot. Stock IRS

1st pass was, motor pass: 60' 1.86
1/4 11.84 118 mph

2nd pass (motor pass): 60' 1.86
1/4 11.65 119 mph

3rd pass (bottle pass): I only sprayed 3rd and 4th and car started to spin tires in 3rd, used my friends bottle my was empty, bottle pressure was 930

60' 1.97
1/4 11.51 126 mph

do you guys think i cold hit 10.99 on warmer weather? on Nittos last summer i was cuting 60foot 1.65. It was to cold to hook saturday.

 

[JimBowy]

If you could spray earlier and keep the traction then I'd say it doesn't sound too far fetched for you to get very low 11s, or very high 10s.

 

[o3SnakeBite]

Yea If you can get some traction and spray at WOT in 1st gear, you will likely trap close to 130, considering you trapped 126 only spraying 2 gears... Do you know what your dyno numbers are with spray? Hows the car holding up to the 2.8 and 100 shot?

 

[z-eater]

car runs good, I have sprayed over 60 times on street.
I dyno 546 rwhp and 756 torq.

 

[blk04cobra1]

I still can't get over the damn torque numbers these things put down...200lbft on a 100shot...you can't beat that...

 

[spyder1337]

756 torq.

Facking sick man! :bash: My lil ole centri blower dreams of that number haha...

 

[chvyeter]

You should be in the high 10's with good traction. Those motors are monsters with a little bottle

 

[wolfsburg2]

nice trap on the giggle

 

[z-eater]

thanks guys. I have to wait for some warmer weather.
I m backing down to 50 shot so I can spray from a dig.