1991 Mustang roller, power windows, power doorlocks, all glass intact.
Wolfe 25.5 chromemoly rollcage installed by JamesB. Pro stock type rear hoop, bars from cage to front shock towers.
SFI funny car cage foam.
Kirkey 17" seat and seat cover, black.
Wolfe crotch strap bracket.
RCI 5 point harness.
10 pound safecraft halon system, two nozzles mounted in engine compartment, one in driver's compartment.
B&M pro stick powerglide shifter with transbrake button on knob.
AJE chromoly k member.
Racecraft adjustable front a-arms, currently set to extend wheelbase 1".
Koni adjustable front drag struts with coilover conversion, 175#/in springs.
Smoked headlights and taillights from 5.0 Resto
New black carpet
Interior dyed black, looks very nice.
remote mount oil filter mounted in driver's fenderwell.
reichard racing cube air to water intercooler, mounted in passenger seat area but low enough to not impede window access. 4" aluminum tubing to and from intercooler, vbands on all connections.
Procharger BOV after turbocharger.
Tial 50mm BOV before throttle body.
electric waterpump for intercooler, -10 aeromotive backflow valve, 2 -10 Y blocks, lines and fittings to intercooler, to transmission cooler, then back to water cell.
40" aluminum wheeltubs professionally installed by JamesB. Will fit 33 x 10.5W MT tire on 15x14" wheel.
5 gallon aluminum fuel cell.
5 gallon icewater cell for intercooler, insulation applied to keep ice cold as long as possible. Large mouth lid installed
liquid to liquid transmission cooler
flaming river battery cutoff switch
flaming river steering rack
UPR bump steer kit
racecraft 17" rear wing. Adjustable angle, adjustable wickerbill, painted body color.
racecraft 2" drop spindles.
aerospace front drag brakes
aerospace dual caliper rear brakes
aerospace manual brake conversion
hurst roll control
strange double adjustable rear coilovers, 125 lb/in springs
flaming river steering shaft
Weld alumastar billet one piece front wheels with MT ET front tires
Weld alumastar 15 x 14" double beadlock rear wheels with MT 33 x 10.5W tires
RJ racecars pro series chromemoly adjustable ladderbars
Strange 40 spline gundrilled axles
Dual Stroud prostock parachutes with spring launchers, mounted by JamesB with cables and handle, handle bracket painted to match car. Parachute tether points custom fit for very clean look on rear bumper
fiberglass hood
fiberglass fenders
fiberglass hatch
custom front spoiler, turbo inlet custom molded into front bumper
Black chrome powdercoated sheetmetal Chromemoly 9", 3.5" axle tubes. Internal gusseting for strength, back brace, ladderbar brackets, coilover brackets, wheeliebar mounts, external bracing.
Black Chrome custom powerglide transmission mount (can be adapted to other transmission types) sized for 25.5 chassis requirements.
Wolfe racecraft double swaybar.
Smoothed engine compartment, shaved windshield wiper opening
Custom paint with flames, Royal Sapphire Pearl. rollcage painted to match.
Painless performance switch box mounted above rearview mirror location on cage.
Skinny Kid racecars motorplate/midplate, 3/8" midplate with motor mount to frame triangulation bar included to suppress front to back motion.
custom plate with autometer voltage gauge installed in gas tank access panel in passenger rear quarter
SFI removable steering wheel hub with grant steering wheel installed, MUCH lighter than stock.
Travel limiters installed in front suspension to supress wheelies
100" chromemoly wheeliebars with upper to lower and side to side support braces installed
Asking $27.5k
Build thread at: Andrew's project thread
Additional items:
304 stainless headers (1 7/8" to 3" collector), 304 stainless hot side (3"), mild steel downpipe, HKS GT 60mm wastegate and PT114 turbocharger also available. All hot side have stainless v-band connections, downpipe has mild steel vband to turbine housing.
I also have an engine to sell...