For those with SVE Series 1 wheels

[slow5oh]

I picked up a set of SVE Series 1 wheels on black friday. I'm starting to do some tire shopping and I was curious what people with them were running, and if anyone had any pictures of how they fit with out any spacers or anything. I'm trying to figure out if I need to get extended lugs and spacers to sit flush.

Wheel specs are:
18x10.5 6.75" back spacing
18x9.5 6.39" back spacing

I'm wanting to do 315/30/18 Toyo R888s, with MM Low pro IRS bolts and and MM Coil over kit.

Ideally I'd like this stance similar to this

Thanks for any help :beer:

 

[SVT_Troy]

you can go up to 335's with a 10.5. With that said you would more than likely need to do both low pro bolt or shave the stock bolt and roll your fenders.

I'd do 315's as I think 335's are way top big but thats just my opinion.

 

[slow5oh]

Thanks for the input, I plan to go with 315s. I've got a fender roller as well so that's good to know.

 

[MACHCT]

I have exactly the same setup I bought the black sve Series 1 and i have 315/30-18 Toyo R888 going on in spring

 

[94slowbra1]

I would not do a 335 30 on a 10.5 wheel. Contact patch suffers and a lot of tire bulge. Personally I'd do a 305 35, good contact patch and a better sidewall. At most I'd go 315 30. More sidewall will fill up the wheel more too giving the car a lower appearance.

 

[TURBOFROG]

I bought a set last winter and ran them all last summer. Have the 315 R888's on the rear with no problem at all. Lowered and I have not rolled the fenders at all.