• Welcome to SVTPerformance!

Ford 9 inch

Discussion in '2013-14 Shelby GT500' started by manny231988, Sep 11, 2019.

  1. manny231988

    manny231988 Active Member Established Member

    Messages:
    506
    Joined:
    Oct 30, 2009
    Location:
    Roswell NM
    hey Guys for those with a 9 inch drop in were y’all able to retain y’alls abs, I’m looking into the strange cobra Jet but couldn’t read anywhere about Abs, I think the Moser and Currie you do retain it, only reason I’m asking is my abs is important because the MoTeC I’m installing does some nice thing with traction control and I would like to retain it, let me know guys looking into ordering this in the coming week.
     
  2. Weather Man

    Weather Man Persistance Is A Bitch Premium Member Established Member

    Messages:
    13,496
    Joined:
    May 18, 2012
    Location:
    MN
    Currie is a yes for sure, I have one.
     
    manny231988 likes this.
  3. manny231988

    manny231988 Active Member Established Member

    Messages:
    506
    Joined:
    Oct 30, 2009
    Location:
    Roswell NM
    Thanks for the reply how you like the Currie? Also idk if I’m wrong but do the only offer 31 spline axles ?
     
  4. Handlebar Moustache

    Handlebar Moustache Well-Known Member Established Member

    Messages:
    282
    Joined:
    Jul 29, 2017
    Location:
    Louisiana
    Affirmative on the Moser M9.
     
  5. Weather Man

    Weather Man Persistance Is A Bitch Premium Member Established Member

    Messages:
    13,496
    Joined:
    May 18, 2012
    Location:
    MN
    I like it and I know mine is 31 spline.
     
  6. biminiLX

    biminiLX never stock Established Member

    Messages:
    9,572
    Joined:
    Jan 17, 2003
    Location:
    Toledo, OH
    What rear brakes?
    On my Strange CJ 9” I also swapped over to rear Wilwoods and I’m struggling to find the solution to keeping ABS. I would assume the Strange with stock rear brakes would be fine.
    -J
     
  7. manny231988

    manny231988 Active Member Established Member

    Messages:
    506
    Joined:
    Oct 30, 2009
    Location:
    Roswell NM
    I wanna stay stock rear brakes? Do your axles have reluctor wheels ? I want the strange but haven’t gotten a straight answer on the whole abs thing which I need Shawn at fisher Motorsports make a custom 9 for our cars, that has custom abs for both stock ecu and after market standalone ecu but like always price is a big thing he said he would send me a quote tomorrow but I’m sure it will be double the price of a strange or moser, J if you don’t mind me asking how much was your axle?
     
  8. manny231988

    manny231988 Active Member Established Member

    Messages:
    506
    Joined:
    Oct 30, 2009
    Location:
    Roswell NM
    I wanna stay stock rear brakes? Do your axles have reluctor wheels ? I want the strange but haven’t gotten a straight answer on the whole abs thing which I need Shawn at fisher Motorsports make a custom 9 for our cars, that has custom abs for both stock ecu and after market standalone ecu but like always price is a big thing he said he would send me a quote tomorrow but I’m sure it will be double the price of a strange or moser, J if you don’t mind me asking how much was your axle?
     
  9. jenkins_1120

    jenkins_1120 Well-Known Member Established Member

    Messages:
    1,955
    Joined:
    Sep 22, 2011
    Location:
    Melbourne, FL
    I have a strange in mine. You will also need a new UCA and panhard bar relocation bracket. I have stock brakes, 35 spline axles, s track, abs works no issues. Ran about 3500 ish


    Sent from my iPhone using Tapatalk
     
    lexustech48 likes this.
  10. manny231988

    manny231988 Active Member Established Member

    Messages:
    506
    Joined:
    Oct 30, 2009
    Location:
    Roswell NM
    Hey Sir what gear ratio and how much power are you running if you don’t mind me asking ? Trying to figure out what gear I wanna run in my setup I have 410’s now but after my engine build and new blower setup I think 410s might be too much idk honestly
     
  11. jazz05

    jazz05 Member Established Member

    Messages:
    300
    Joined:
    Sep 27, 2006
    Location:
    alberta
    Let me know what Shawn's price is, I'm assuming you got your Motec thru him as well?
     
  12. manny231988

    manny231988 Active Member Established Member

    Messages:
    506
    Joined:
    Oct 30, 2009
    Location:
    Roswell NM
    Will do I know it will be more for sure I just wanna know how much, theres pictures of the 9 inch on his Instagram and it looks legit, and ya all my MoTeC stuff Is getting done by him
     
  13. biminiLX

    biminiLX never stock Established Member

    Messages:
    9,572
    Joined:
    Jan 17, 2003
    Location:
    Toledo, OH
    Info above and price is correct, and I do have ABS reluctors but currently need a custom solution with the non stock rear brakes. You will be fine running the Strange and stock rears, they have the correct caliper mount.
    And you do NOT need a new UCA if you have a newer piece. At least with my BMR UCA it’s was a swap over.
    Custom driveshop was the only delay buy even that wasn’t bad, around $1100 for an SFI CF shaft from PST.
    -J
     
    manny231988 likes this.
  14. SteveWK

    SteveWK Active Member Established Member

    Messages:
    371
    Joined:
    Jul 3, 2012
    Location:
    Wichita, KS
    What kind of differential are you guys using? If I did this swap, I'd like to put a torsen in like the car came with.
     
  15. manny231988

    manny231988 Active Member Established Member

    Messages:
    506
    Joined:
    Oct 30, 2009
    Location:
    Roswell NM
    Before I got the idea to go 9 in had already talked to Shawn and he said the MoTeC had some nice features for traction but that he had a special bracket to add another sensor to my 8.8 to have 4 sensors total back there but then I got the 9 in my head and now I’m dead set on it I like the strange and the Currie is nice also but If Shawn’s is not too far off in price I’ll probly do his, what diff are you running I was thinking tru trac or wavtrac 35 spline but not sure on on gear ratio I have 410’s but now I feel like I might need to bring it to 325 idk
     
  16. manny231988

    manny231988 Active Member Established Member

    Messages:
    506
    Joined:
    Oct 30, 2009
    Location:
    Roswell NM
    Right now I’m just in the stock Torsen but will be going 35 spline wave trac or Detroit true trac, wish there was a 40 spline option without going to a spool .
     
  17. manny231988

    manny231988 Active Member Established Member

    Messages:
    506
    Joined:
    Oct 30, 2009
    Location:
    Roswell NM
    Got the price 8700 it’s a double floater 9inch
     
  18. jenkins_1120

    jenkins_1120 Well-Known Member Established Member

    Messages:
    1,955
    Joined:
    Sep 22, 2011
    Location:
    Melbourne, FL
    I’m around 750hp, 28” stiff wall slick, 3.89 gear and I cross the line soon as the shift light comes on in 4th


    Sent from my iPhone using Tapatalk
     
  19. jazz05

    jazz05 Member Established Member

    Messages:
    300
    Joined:
    Sep 27, 2006
    Location:
    alberta
    Thanks Manny, my only question now is what is the difference between Strange's retomod floater and a true double floater? Other than about 2500$? Strange can supply a 15" beadlock friendly floater without center section for 4100$
     
  20. manny231988

    manny231988 Active Member Established Member

    Messages:
    506
    Joined:
    Oct 30, 2009
    Location:
    Roswell NM
    Sorry double floater is a typo it’s just a floater and ya he explained that he uses ones of the heaviest center sections the only problem that we ran into is he uses a 5x5 pattern because he’s had the 5x4.5 shear off because of high torque I’m just thinking I’m my head like damm how much torque, my biggest problem is I already have custom single bead welds already made and custom Vossen work wheels on it now and I’m just not looking into buying all new wheels, idk strange and mosser are still on the table because of the price, I just wanna find out if I can buy a drop in 9 from mosser or strange and add the floater option and be able to use my stock brakes and abs and keep my bolt pattern so I can just reuse my wheels
     

Share This Page