Building a motor for my 03 cobra and going to run e85..will have. The 2.3whipple at 22psi for now but will be upgrading to a 2.9 or 3.4 in the. Near future
here's the kit… ik I want black fuel rails, 465 pumps, I'd rather use the startlite hose. Bc. It. Will match my. Engine bay better but if it weeps I dont want it Going with the Fc3 controller now should I get the -8 feed /return… -10feed/-8return… or special order a -10feed / -10 return… for the rest of it I need your help bc idk what I need or dont needs
Thanks
*Black
*Clear (satin silver)
*Delete 4V fuel rails [ -$230.00 ]
*
*None
*2 x Walbro GSS342 + filters [ +$156.00 ]
*2 x Walbro F10000302 + filters [ +$276.00 ]
*2 x AEM 50-1000 + filters [ +$216.00 ]
*2 x AEM 50-1200 + filters [ +$258.00 ]
*2 x TI Auto F90000262 + filters [ +$216.00 ]
*2 x TI Auto F90000267 + filters [ +$306.00 ]
*
*None (I have my own fuses, wiring, relays, etc)
*FC2 Controller with 6 gauge wiring [ +$199.00 ]
*FC3 Staged Controller with 4 gauge wiring [ +$239.00 ]
*Sealed Delphi Connector and 7' 12 AWG pigtail only [ +$25.00 ]
*
*Teflon -8 Feed / Return
*Startlite -8 Feed / Return
*Startlite -10 Feed, -8 Return [ +$65.00 ]
*Upgrade to reusable stainless 10 micron filter [ +$30.00 ]
*Add billet mounting bracket [ +$40.00 ]
*
*0-100 psi Fuel Pressure Gauge [ +$24.00 ]
*Honeywell Pressure Switch for FC3 [ +$32.00 ]
*Boost / Vacuum Manifold Kit [ +$75.00 ]
*Add FRPS blockoff kit [ +$22.00 ]
*
*Include 6mL tube of Loctite 567 [ +$8.50 ]
*AN soft jaws and wrench set [ +$62.00 ]
here's the kit… ik I want black fuel rails, 465 pumps, I'd rather use the startlite hose. Bc. It. Will match my. Engine bay better but if it weeps I dont want it Going with the Fc3 controller now should I get the -8 feed /return… -10feed/-8return… or special order a -10feed / -10 return… for the rest of it I need your help bc idk what I need or dont needs
Thanks
*Black
*Clear (satin silver)
*Delete 4V fuel rails [ -$230.00 ]
*
*None
*2 x Walbro GSS342 + filters [ +$156.00 ]
*2 x Walbro F10000302 + filters [ +$276.00 ]
*2 x AEM 50-1000 + filters [ +$216.00 ]
*2 x AEM 50-1200 + filters [ +$258.00 ]
*2 x TI Auto F90000262 + filters [ +$216.00 ]
*2 x TI Auto F90000267 + filters [ +$306.00 ]
*
*None (I have my own fuses, wiring, relays, etc)
*FC2 Controller with 6 gauge wiring [ +$199.00 ]
*FC3 Staged Controller with 4 gauge wiring [ +$239.00 ]
*Sealed Delphi Connector and 7' 12 AWG pigtail only [ +$25.00 ]
*
*Teflon -8 Feed / Return
*Startlite -8 Feed / Return
*Startlite -10 Feed, -8 Return [ +$65.00 ]
*Upgrade to reusable stainless 10 micron filter [ +$30.00 ]
*Add billet mounting bracket [ +$40.00 ]
*
*0-100 psi Fuel Pressure Gauge [ +$24.00 ]
*Honeywell Pressure Switch for FC3 [ +$32.00 ]
*Boost / Vacuum Manifold Kit [ +$75.00 ]
*Add FRPS blockoff kit [ +$22.00 ]
*
*Include 6mL tube of Loctite 567 [ +$8.50 ]
*AN soft jaws and wrench set [ +$62.00 ]
Last edited: