FORSALE: '04 Aviator Upper and lower intake

[itsrlong]

FORSALE: '04 Aviator Upper and lower intake
=================================

Less than 4k miles. $375 shipped. S - O - L - D !!!!


[email protected]

 

[itsrlong]

Lowered price...

 

[itsrlong]

T T T

 

[itsrlong]

T T T

 

[SID297]

Just so everyone knows this intake will bolt to Terminator, MM, and Mach 1 heads, and features the variable length runners.

 

[itsrlong]

Yeah, thanks SID... Also known as "poor man's FR500 intake". Will also bolt onto '99-01 Cobra...

 

[mach1gsxr]

Got any pics of the porting and polishing done to it.

 

[itsrlong]

Who said anything about it being ported and polished? It is completely stock.

Got any pics of the porting and polishing done to it.

 

[mach1gsxr]

Sorry, I was assuming there. What all is needed to make it work with an 03 mach 1. Will it still need to be ported and polished to get maximum use out of it? If so what is the advantage of this intake over a stock mach intake p/p.

 

[itsrlong]

It should bolt right on, but unless you have an aftermarket hood, I don't know if it will close or not. Porting and polishing is always beneficial, but I'm not sure about the actual gains. You would have to check on modularfords.com or one the Mach1 boards about anything else needed to make it work.

Sorry, I was assuming there. What all is needed to make it work with an 03 mach 1. Will it still need to be ported and polished to get maximum use out of it? If so what is the advantage of this intake over a stock mach intake p/p.

 

[itsrlong]

T T T

 

[itsrlong]

T T T

 

[itsrlong]

Sold!!!!