S - O - L - D !!!!!
Shortblock info:
============
Navigator iron 5.4 block (decked .045, torque plate honed and mains lined honed)
forged steel crank
forged h-beam rods
forged Probe flat-top pistons (stock bore)
King hi-po main and rod bearings
Total Seal ring set with stainless top ring
ARP main studs
BUYER MAKES/PAYS FOR ALL SHIPPING ARRANGEMENTS!!
I would sell shortblock for $2095.00.
Built 5.4 DOHC Navigator shortblock.
Shortblock info:
============
Navigator iron 5.4 block (decked .045, torque plate honed and mains lined honed)
forged steel crank
forged h-beam rods
forged Probe flat-top pistons (stock bore)
King hi-po main and rod bearings
Total Seal ring set with stainless top ring
ARP main studs
Compression ratio is 10.7 to 1.
Motor has about 55-60 1/8 mile passes and a couple dyno runs.
It has been 5.80's at 125 on DR with 88mm turbo and BigStuff 3 on E85. (Only 13 degrees of timing and 17 pounds of boost)
It has been 5.80's at 125 on DR with 88mm turbo and BigStuff 3 on E85. (Only 13 degrees of timing and 17 pounds of boost)
BUYER MAKES/PAYS FOR ALL SHIPPING ARRANGEMENTS!!
I would sell shortblock for $2095.00.
Last edited: