'96 Cobra motor (built by MPH in Atlanta) w/ less than 9k miles
==============================================
Complete longblock from upper intake to oil pan (Teksid block of course)
9.8:1 compression w/ Ross forged pistons
Scat forged h beam rods w/ ARP rod bolts
Stock forged cobra crank w/ tri metal bearings
ARP head and main studs w/ billet oil pump gears and billet trigger wheel
Heads are stock w/ five angle valve job
8-rib Pulley setup
MSD 8.5 wires
If deal is struck, will include Accufab single blade T/B.
It's ready to drop in and go. Rated at 750-800 rwhp.
$5999 OBO (shipping not included)
Will sell the intake and heads together, but that's the only way I will part it out.
[email protected]
'03 Cobra shortblock w/ less than 10k miles (SOLD!!!)
================================
'03 Cobra block stock bore
'03 Cobra stock forged crank w/ stock crank bearings
'03 Cobra stock pistons w/ new rings (polished and cleaned up)
Have the heads(newer w/ blue paint from Ford). Fully assembled, but not installed.
Includes chains, guides, front cover, valve covers, oil pan.
If deal is struck, will include ARP head studs and new head gaskets.
Will separate heads and shortblock.
$4999 OBO (shipping not included) SOLD!!!
[email protected]
==============================================
Complete longblock from upper intake to oil pan (Teksid block of course)
9.8:1 compression w/ Ross forged pistons
Scat forged h beam rods w/ ARP rod bolts
Stock forged cobra crank w/ tri metal bearings
ARP head and main studs w/ billet oil pump gears and billet trigger wheel
Heads are stock w/ five angle valve job
8-rib Pulley setup
MSD 8.5 wires
If deal is struck, will include Accufab single blade T/B.
It's ready to drop in and go. Rated at 750-800 rwhp.
$5999 OBO (shipping not included)
Will sell the intake and heads together, but that's the only way I will part it out.
[email protected]
'03 Cobra shortblock w/ less than 10k miles (SOLD!!!)
================================
'03 Cobra block stock bore
'03 Cobra stock forged crank w/ stock crank bearings
'03 Cobra stock pistons w/ new rings (polished and cleaned up)
Have the heads(newer w/ blue paint from Ford). Fully assembled, but not installed.
Includes chains, guides, front cover, valve covers, oil pan.
If deal is struck, will include ARP head studs and new head gaskets.
Will separate heads and shortblock.
$4999 OBO (shipping not included) SOLD!!!
[email protected]
Last edited:
