Im replacing my front control arm bushings with the Steeda offset bushings and I had a quick question. Am I supposed to apply grease between the metal sleeve and the bushing itself? Also, is grease supposed to be applied between the metal shim/rod and the bushing? I've done some research and found nothing and it didn't come with any instructions at all. Thanks in advance.
Front Control Arm Grease
- Thread starter ConeCrusher281
- Start date
No grease in the first pic, grease in the second pic and also some anti seize or grease on the shaft of the bolt.
Use a good quality grease. I use Super Lube grease with any poly or delrin bushings.
Use a good quality grease. I use Super Lube grease with any poly or delrin bushings.
Use greese on all contact points to the bushing.coat everything in the energy suspension grease. Or the steeda supplied grease. You can order the energy suspension grease from O'Reillys
Users who are viewing this thread
