FS: 02 GT, Cobra Clone, MN

amarchant

New Member
Established Member
Joined
Mar 17, 2011
Messages
128
Location
Grant, MN
Thank you for your interest in my car. There is absolutely nothing wrong, I am looking to sell because another opportunity has presented itself. No stories, no excuses, clean title, in hand. To answer some of the questions that are going to be asked, I do not know the actual HP or TRQ numbers. The car has never been down the track, don't know the 1/4 times, never been on the dyno. Here are some of the specifics:

Mileage:
27,400 +/-

Exterior -
All OEM 03/04 Cobra front, rear bumpers, side skirts, and spoiler. Aftermarket 03/04 Cobra hood painted matte black with FORE hood vents.
Cobra emblems

Wheels/Tires -
CCW Classics!
18x9.5 front
18X11 rear
BFG KDW's 265/35/18 front
BFG Drag Radials 315/30/18 rear, will need replacing fairly soon.
-OR-
Saleen Replicas, Black
18x9 front
18x10 rear
Brand new tires

Engine -
4.6 2V SOHC
2.1L Intercooled Kenne Bell supercharger
Kenne Bell Big tube kit
Accufab 75 mm throttle body
90 mm MAF
Kenne Bell boost a pump
(this was all a proven and test kit from Kenne Bell)
Richard Racing billet tensioner
Ford Racing A/C delete pulley
SLP Loudmouth II catback exhaust

Driveline -
Viper Spec T56 6 speed from D&D performance
Aluminum driveshaft
Fidenza billet steel flywheel
Zoom stage II kevlar clutch

Torsen T2 differential
Moser 31 spline axles
Ford Racing 3:73 gears
All new Ford Racing bearings and seals

Suspension -
H&R sportline springs
Tokico adjustable struts and shocks
Maximum Motorsports adjustable lower control arms
Steeda bumpsteer kit
Steeda X2 balljoints
Steeda XL subframe connectors
Cobra brakes with 13" brembo rotors

Interior -
Real Cobra Seats, Front and Rear
White face gauges
Custom suede with white stitch steering wheel
suede with white stitch shift and e-brake boot
03/04 cobra 6 speed shift knob

I'm sure i missed a few things (theres a lot to remember) shoot me a PM if you have questions. The interior in the pictures is the old interior, it now has real cobra seats, no roll bar, new factory seat belts.

Asking $18k with the CCW wheels or $16,5k with the Saleen Replicas, offers will be considered. I am motivated, not to be confused with desperate.

Trades, sure, we can discuss them...

Pictures: Pictures by amarchant - Photobucket
 

SVT5.4L

Member
Established Member
Joined
Aug 30, 2010
Messages
260
Location
LA
i'm interested in this car and sent you a pm also what did you do the fuel system to support the kb? and how much power would you estimate the car makes
 

amarchant

New Member
Established Member
Joined
Mar 17, 2011
Messages
128
Location
Grant, MN
WOW, a lot of interest. I will answer some of the questions here, I am sure others have the same questions. For those of you who sent pm's, I will get back with you shortly.

Tune:
- Kenne Bell, a custom chip programed by Kenne Bell for the current set-up. No third party tune, right from the experts.
Fuel System:
- Kenne Bell "boost-a-pump" (which will support up to 600hp), came with the kit and the injectors have been upgraded to 42 lb injectors.

Horsepower:
- I have been told, as it sits right now, the hp should be in the 425 range.

Any more questions, feel free to post here or pm me. I will get back to everyone.

Andy
 
Last edited:

amarchant

New Member
Established Member
Joined
Mar 17, 2011
Messages
128
Location
Grant, MN
Some pictures:

02Cobra005.jpg


02Cobra003.jpg


02Cobra008.jpg


02CobraClone6.jpg


02CobraClone3.jpg


02CobraClone1.jpg


I will get some of the updated interior soon.
 

amarchant

New Member
Established Member
Joined
Mar 17, 2011
Messages
128
Location
Grant, MN
Some pictures:

Saleens, cleaned up:
IMG_1070.jpg

Interior:
IMG_1054.jpg

Interior:
IMG_1053.jpg

Center Stack:
IMG_1056.jpg

Drivers Door Panel:
IMG_1058.jpg

Passenger Door:
IMG_1059.jpg

Under:
IMG_1050.jpg

Rear End:
IMG_1049.jpg

Drivers Rear Qtr:
IMG_1067.jpg

Passenger Side:
IMG_1065.jpg

There are more on the photobucket site, I can send some if you would like.

Car is nice and clean.

No comments about the garage clutter. :nonono:
 

amarchant

New Member
Established Member
Joined
Mar 17, 2011
Messages
128
Location
Grant, MN
Any interesting trades?

As you can see, the finish is almost new, no dents, dings or scratches.

For those of you that are outside of Minnesota, I can help with shipping arrangements or meet 1/2 way.

If you are truely interested, I can have my mechanic or a shop of your choosing do a complete pre-purchase inspection and send it directly to you.

Andy
 

amarchant

New Member
Established Member
Joined
Mar 17, 2011
Messages
128
Location
Grant, MN
/\ Up We Go /\

Have a great holiday weekend!

Thanks to all the men and women that have served and continue to do so.

:rockon:
 

03-dsg-gt

Member
Established Member
Joined
Aug 3, 2008
Messages
326
Location
tampa, Fl
By far one of the nicest new edges ive ever seen. Beautiful car man.. And how does that suede steering wheel hold up? Is it durable enough for a dd? And where did you get it done im having a hard tome finding peoiple that will do it..
 

amarchant

New Member
Established Member
Joined
Mar 17, 2011
Messages
128
Location
Grant, MN
By far one of the nicest new edges ive ever seen. Beautiful car man.. And how does that suede steering wheel hold up? Is it durable enough for a dd? And where did you get it done im having a hard tome finding peoiple that will do it..

Thanks for the compliment. The suede is holding up fine, although I do not use the car as a DD. There is a local interior guy that did the steering wheel and arm rest.
 

Users who are viewing this thread



Top