Its time to put my Mach 1 up for grabs... I'm not sad , I'm not hurting, I'm not going through a divorce.lol Just selling out ... Its time to focus on my Twin girls!
A lot of you know about my Mach1. There isn't much to say about it other than its a very nice car, with big power but has the flexibility to be a daily driver or a track car.
It currently has 3 tunes.. Gas tune, gas with meth tune and an E85 Tune...
As the Mach 1 sits now, its got a mild tune at 18lbs boost on 17* Timing and 816 RWHP w/ 723 RWTQ
I'll get right to the List of Mods, followed by some pictures and an asking price...
The parts list as follows:
ENGINE......
Boss Big Bore 5.0 (.020 over) (Stroked) (5.3)
Oliver Billet "I" Beam Rods (upgraded wrist pins)
Custom Diamond Pistons (25+lbs Boost)
Total Seal Rings
Clevite Coated Bearings
TSS Billet Oil Pump
SCE ICS Titian Head gaskets
Ported Mach 1 Heads (Fr500 Valves, Comp Cams Springs)
Custom Bullet Racing Cams
Innovators West 10% Overdrive Pulley
F1-A (Polished) Procharger (Air to Air Inter-cooler) (3.70 pulley)
Procharger Open Race By-Pass Valve
Pro-M Pro Tube Mass Air
Bosch 105lb Injectors
Fore Fuel Rails
Custom 8 Rib conversion (pulleys)
Stock Mach 1 Intake
Acufab Throttle body
LFP Pro Competition Race Radiator
Stock cooling Fan
Canton Reservoir
Canton Reservoir Overflow Catch Can
Canton Power Steering Can
Canton Street/Strip Oil Pan
Canton Windage Tray
Anderson Motorsports Power Pipe
Custom engine breather system (jaz products catch can and custom made cam cover AN fittings)
MSD 2 Step Rev/ Launch control
FUEL SYSTEM...
Fore Fuel Rails
Glens Performance Sumped Fuel Tank
Magna Fuel Pro 750 Fuel Pump
Magna Fuel Pre Fuel Filter
Magna Fuel After Fuel Filter
Fagoli AN Fittings
Areomotive Fuel Pressure Regulator
Snow Performance Stage 3 With Safe Injection Methanol Injection
Snow Performance Upgraded to Dual Nozzle
Complete custom fuel lines and hardware
DRIVE TRAIN...
Transmission , Liberty Gear Viper Spec T56
Custom 26 Input Shaft
Custom 11" Clutch and Pressure Plate
Ford Racing Steal Fly Wheel
MGW (Orange Handle) Shifter
MGW Composite Shift Knob
FRPP Aluminum Drive Shaft
Lakewood Drive Shaft Safety Loop
Ford Racing 31 Spline Differential
Ford Racing 31 Spline Axels
Ford Racing 3:73 Ring and Pinion
Ford Racing Mega Bite JR Lower Control Arms
Steeda HD Double Adjustable Upper Control Arms
Steeda Sport Springs
Bilstein HD Shocks and struts
UPR Chrome Molly "K" Member
Maximum Motorsports Solid Steering Rack Bushings
Maximum Motorsports Caster Camber Plates
Maximum Motorsports Front Coil Overs
Maximum Motorsports (325 lb) Springs
Bilstein HD Struts
SLP Line Lock
SCT Tune(s) with SCT XCAL 4!
INTERIOR ....
Custom Chrome Molly (8pt Roll Bar, with Swing out/Removable Door Bars, Painted to Match Car Color)
Steeda (Zink) Tubular Sub Frame Connectors (Painted Black)
(2) G-Force 5PT Cam Lock Racing Harnesses
Aeroforce interceptor Dual gauges
Aeroforce Fuel Pressure sensor
Aeroforce Oil Pressure sensor
Aeroforce Air/Fuel sensor (wideband)
FR500 Steering Wheel
Cobra Leather Shift Boot
Cobra Leather E-Brake and Leather E-Break Boot
EXHAUST......
Kooks 1 3/4" Long Tube Headers (3" Collectors)
Kooks O/R "X" Pipe 3" in/out
Magnaflow Competition 3” Exhaust (3 ½” Tips)
WHEELS....
Chrome Mach 1 Wheels (Off Set 9" wheels in Front/10.5 DD Back)
Mickey Thompson Drag Radials (315/35/17) Back
BF Goodrich G-Force Kd T/A (275/40/17) Front
Ice Cold A/C!
PICTURES Click on them to access the Photobucket and double click for super-size and fine detail images !
$26,000 OBRO…. (or best reasonable offer) Motivated but not stupid or desperate..
Text or Call
I have all paper work and title in hand...
Jon 860-777-8978
A lot of you know about my Mach1. There isn't much to say about it other than its a very nice car, with big power but has the flexibility to be a daily driver or a track car.
It currently has 3 tunes.. Gas tune, gas with meth tune and an E85 Tune...
As the Mach 1 sits now, its got a mild tune at 18lbs boost on 17* Timing and 816 RWHP w/ 723 RWTQ
I'll get right to the List of Mods, followed by some pictures and an asking price...
The parts list as follows:
ENGINE......
Boss Big Bore 5.0 (.020 over) (Stroked) (5.3)
Oliver Billet "I" Beam Rods (upgraded wrist pins)
Custom Diamond Pistons (25+lbs Boost)
Total Seal Rings
Clevite Coated Bearings
TSS Billet Oil Pump
SCE ICS Titian Head gaskets
Ported Mach 1 Heads (Fr500 Valves, Comp Cams Springs)
Custom Bullet Racing Cams
Innovators West 10% Overdrive Pulley
F1-A (Polished) Procharger (Air to Air Inter-cooler) (3.70 pulley)
Procharger Open Race By-Pass Valve
Pro-M Pro Tube Mass Air
Bosch 105lb Injectors
Fore Fuel Rails
Custom 8 Rib conversion (pulleys)
Stock Mach 1 Intake
Acufab Throttle body
LFP Pro Competition Race Radiator
Stock cooling Fan
Canton Reservoir
Canton Reservoir Overflow Catch Can
Canton Power Steering Can
Canton Street/Strip Oil Pan
Canton Windage Tray
Anderson Motorsports Power Pipe
Custom engine breather system (jaz products catch can and custom made cam cover AN fittings)
MSD 2 Step Rev/ Launch control
FUEL SYSTEM...
Fore Fuel Rails
Glens Performance Sumped Fuel Tank
Magna Fuel Pro 750 Fuel Pump
Magna Fuel Pre Fuel Filter
Magna Fuel After Fuel Filter
Fagoli AN Fittings
Areomotive Fuel Pressure Regulator
Snow Performance Stage 3 With Safe Injection Methanol Injection
Snow Performance Upgraded to Dual Nozzle
Complete custom fuel lines and hardware
DRIVE TRAIN...
Transmission , Liberty Gear Viper Spec T56
Custom 26 Input Shaft
Custom 11" Clutch and Pressure Plate
Ford Racing Steal Fly Wheel
MGW (Orange Handle) Shifter
MGW Composite Shift Knob
FRPP Aluminum Drive Shaft
Lakewood Drive Shaft Safety Loop
Ford Racing 31 Spline Differential
Ford Racing 31 Spline Axels
Ford Racing 3:73 Ring and Pinion
Ford Racing Mega Bite JR Lower Control Arms
Steeda HD Double Adjustable Upper Control Arms
Steeda Sport Springs
Bilstein HD Shocks and struts
UPR Chrome Molly "K" Member
Maximum Motorsports Solid Steering Rack Bushings
Maximum Motorsports Caster Camber Plates
Maximum Motorsports Front Coil Overs
Maximum Motorsports (325 lb) Springs
Bilstein HD Struts
SLP Line Lock
SCT Tune(s) with SCT XCAL 4!
INTERIOR ....
Custom Chrome Molly (8pt Roll Bar, with Swing out/Removable Door Bars, Painted to Match Car Color)
Steeda (Zink) Tubular Sub Frame Connectors (Painted Black)
(2) G-Force 5PT Cam Lock Racing Harnesses
Aeroforce interceptor Dual gauges
Aeroforce Fuel Pressure sensor
Aeroforce Oil Pressure sensor
Aeroforce Air/Fuel sensor (wideband)
FR500 Steering Wheel
Cobra Leather Shift Boot
Cobra Leather E-Brake and Leather E-Break Boot
EXHAUST......
Kooks 1 3/4" Long Tube Headers (3" Collectors)
Kooks O/R "X" Pipe 3" in/out
Magnaflow Competition 3” Exhaust (3 ½” Tips)
WHEELS....
Chrome Mach 1 Wheels (Off Set 9" wheels in Front/10.5 DD Back)
Mickey Thompson Drag Radials (315/35/17) Back
BF Goodrich G-Force Kd T/A (275/40/17) Front
Ice Cold A/C!
PICTURES Click on them to access the Photobucket and double click for super-size and fine detail images !
$26,000 OBRO…. (or best reasonable offer) Motivated but not stupid or desperate..
Text or Call
I have all paper work and title in hand...
Jon 860-777-8978
Last edited: