Hey guys,
As the title says 96 Cobra engine with 50k on the clock the bad part is that it has a tick in the engine that has been diagnosed as a bad bearing(s). I Started the car up one morning and there it was knocking. I pulled the engine that day and decided not to rebuild and go with a pushrod engine. So this engine at the very least needs bearings otherwise it was a VERY strong running motor before the problem. Everything else is good on engine except maybe the crank which may need to be machined a little. Car was ran for probably only 5 minutes tryin to figure out the noise before it was turned off and was pulled. Im looking to get $1100 for the engine intake to oil pan.
I also am selling the T-45 out of the same car. The trans shifts very smooth and has never given me any problems. Im looking to get $600.
I will take $1500 for both as a package. Im located in North Jersey and this is pickup only.
As the title says 96 Cobra engine with 50k on the clock the bad part is that it has a tick in the engine that has been diagnosed as a bad bearing(s). I Started the car up one morning and there it was knocking. I pulled the engine that day and decided not to rebuild and go with a pushrod engine. So this engine at the very least needs bearings otherwise it was a VERY strong running motor before the problem. Everything else is good on engine except maybe the crank which may need to be machined a little. Car was ran for probably only 5 minutes tryin to figure out the noise before it was turned off and was pulled. Im looking to get $1100 for the engine intake to oil pan.
I also am selling the T-45 out of the same car. The trans shifts very smooth and has never given me any problems. Im looking to get $600.
I will take $1500 for both as a package. Im located in North Jersey and this is pickup only.