Figure I'll have to part it out on Ebay to sell it but I'll try it on here to avoid the hassle of ebay. I have almost every part needed to swap this on a 99+ 4V car. Blower is like new. has 2800 miles on it. Stock pulley has never been off it.
Crank pulley /Harmonic Balancer
Supercharger Crank drive pulley
Pulley bridge assembly for S.C.
Timing cover
Upper alternator bracket
Lower alternator bracket
1U2Z-14S411-TA Electrical connector (alt. to harmness )
Water cross over pipe
Cobra oil cooler adapter
Cobra Oil cooler
Eaton supercharger
Lower intake
Garrett factory intercooler
Intercooler hard lines that hug the block
Intercooler hard lines that come from the h/e
Intercooler pipe to heat Exchanger that goes from the i/c adapter to i/c res.
Intercooler pipe to heat Exchanger that goes from the i/c adapter to the hard lines that hug the block
Intercooler pipe to heat Exchanger that goes from the hard line to i/c pump
Intercooler pipe to heat Exchanger that goes from hard line to hard line coming from h/e
Intercooler pipe to heat Exchanger that goes from hard line from h/e to i/c pump
Intercooler pipe to heat Exchanger that goes from hard line and connects to h/e
Intercooler pipe to heat Exchanger that goes from hard line and connects to h/e
Ford / Bosche water pump for intercooler
Factory heat exchanger
Heat exchanger mounting bracket
2each bracket clamps for h/e
Lower manifold to intercooler water adapter
Plenum
Throttle Body
IAC valve
Injectors
Fuel rail's
Boost bypass actuator
Intercooler pump bracket
Throttle cable
Throttle and cruise control cable mounting bracket
EGR valve
EGR tube
PCV tubing
Bracket for vacuum stuff on left side of the S/C
Need $2800 shipped.
PM me if interested or email to TitaniumGT2 at aol.com
Crank pulley /Harmonic Balancer
Supercharger Crank drive pulley
Pulley bridge assembly for S.C.
Timing cover
Upper alternator bracket
Lower alternator bracket
1U2Z-14S411-TA Electrical connector (alt. to harmness )
Water cross over pipe
Cobra oil cooler adapter
Cobra Oil cooler
Eaton supercharger
Lower intake
Garrett factory intercooler
Intercooler hard lines that hug the block
Intercooler hard lines that come from the h/e
Intercooler pipe to heat Exchanger that goes from the i/c adapter to i/c res.
Intercooler pipe to heat Exchanger that goes from the i/c adapter to the hard lines that hug the block
Intercooler pipe to heat Exchanger that goes from the hard line to i/c pump
Intercooler pipe to heat Exchanger that goes from hard line to hard line coming from h/e
Intercooler pipe to heat Exchanger that goes from hard line from h/e to i/c pump
Intercooler pipe to heat Exchanger that goes from hard line and connects to h/e
Intercooler pipe to heat Exchanger that goes from hard line and connects to h/e
Ford / Bosche water pump for intercooler
Factory heat exchanger
Heat exchanger mounting bracket
2each bracket clamps for h/e
Lower manifold to intercooler water adapter
Plenum
Throttle Body
IAC valve
Injectors
Fuel rail's
Boost bypass actuator
Intercooler pump bracket
Throttle cable
Throttle and cruise control cable mounting bracket
EGR valve
EGR tube
PCV tubing
Bracket for vacuum stuff on left side of the S/C
Need $2800 shipped.
PM me if interested or email to TitaniumGT2 at aol.com
