I am looking for a 99-04 Lightning or a 03/04 Cobra. Maybe other Mustangs but who knows?
I have a Completely fresh Backhalfed Mustang up for Sale or Trade. All the car needs to be a SUPER nice piece is prep work and paint. The WHOLE Driveline has 10 runs on it. More pictures once it stops raining here in VA!
Previous best of car was 4.90's @ 140+ int he 1/8th with SBF and 2-stages. I have partially installed a plate system but have not finished. Current setup runs 9.30's on motor and is ready for the spray. Nitrous Convertor setup for 1500+hp.
I just spent $19,500 on the motor, $4400 on the trans and convertor, $1000 in fuel system, $1300 in new wheels and tires. NOT EVEN COUNTING THE MONEY SPENT ON CAR!
I have a TON in this car! Its built to last!
Here is all the info on car:
1990 LX Hatch
8.50 Certified NHRA and IHRA Cage
GT Front Bumper
4-link Backhalf by Alston- Big Tube 4-link not cheap stlye
Florida 5.0 Dash Kit with gauges
Dual Kirky Seats
All Interior in place except for back seat (Wheel Tubs)
Black Carpet
6in Outlaw Hood
All Glass except doors are lexan
Ed Quay Rear Wing
Strange Coil Overs in Front
QA1 Coil Overs in Rear
15x3.5 Stars Up front with ET Fronts
15x14 Rears with 32x14w Phoenix Slicks
Chute and Release
Full MSD system with Electronics
Pro Stick Shifter
AJE K-member
AJE Control Arms
AJE Cross member
Braced rear with 4.86 gears
Full JW Super Case Glide
JW Ultra Bell
JW 1.80 Straight Cut
Pro Brake
JW Roller Tailshaft
Trans Specialties 8in Nitrous Race Convertor $950
Motor 438w
Dart Pro Sportsman Block with Prep 4.125 Bore
Trick Flow Series R 235 Outlaw Heads by TEA Flow 377cfm @ 800
Eagle 4340 4.100 Crank
Eagle 4340 6.200 H-beam Rods
Diamond Custom 13 to 1 Pistons
Trick flow Pushrods
Trick Flow 1.6 Roller Rockers
Comp Pro Magnum Roller Lifters
Trick Flow Stud Girdles
Eldebrook Yates Style Intake for 4500 Carb
1050 CFM Dominator
Jesel Belt Drive
Comp .749 Solid Roller by Bennet Specs
Complete Stud Kit
Canton Stroker Oil pan
MSD Pro Billet Distrib
JW The "WheeL" flywheel
ATI Fluid Damper
CSI WaterPump
Afco radiator
Aeromotive A2000 Fuel System
10an Supply
NOS Big SHot Plate System
I will take $21,000 Turnkey as it sits
I will Take $16,500 for the car with my spare 408w motor in it Running 9.60's
I will Take $9,000 for car Minus, Motor, Tranny, Fuel, and Exhaust
I will trade for other Mustangs, Lightnings, Lifted Trucks, or maybe others?
Car is located in Richmond, VA
Contact: Richard [email protected] or 804-986-7353
This is not junk and I wont trade for junk either.
I have a Completely fresh Backhalfed Mustang up for Sale or Trade. All the car needs to be a SUPER nice piece is prep work and paint. The WHOLE Driveline has 10 runs on it. More pictures once it stops raining here in VA!
Previous best of car was 4.90's @ 140+ int he 1/8th with SBF and 2-stages. I have partially installed a plate system but have not finished. Current setup runs 9.30's on motor and is ready for the spray. Nitrous Convertor setup for 1500+hp.
I just spent $19,500 on the motor, $4400 on the trans and convertor, $1000 in fuel system, $1300 in new wheels and tires. NOT EVEN COUNTING THE MONEY SPENT ON CAR!
I have a TON in this car! Its built to last!
Here is all the info on car:
1990 LX Hatch
8.50 Certified NHRA and IHRA Cage
GT Front Bumper
4-link Backhalf by Alston- Big Tube 4-link not cheap stlye
Florida 5.0 Dash Kit with gauges
Dual Kirky Seats
All Interior in place except for back seat (Wheel Tubs)
Black Carpet
6in Outlaw Hood
All Glass except doors are lexan
Ed Quay Rear Wing
Strange Coil Overs in Front
QA1 Coil Overs in Rear
15x3.5 Stars Up front with ET Fronts
15x14 Rears with 32x14w Phoenix Slicks
Chute and Release
Full MSD system with Electronics
Pro Stick Shifter
AJE K-member
AJE Control Arms
AJE Cross member
Braced rear with 4.86 gears
Full JW Super Case Glide
JW Ultra Bell
JW 1.80 Straight Cut
Pro Brake
JW Roller Tailshaft
Trans Specialties 8in Nitrous Race Convertor $950
Motor 438w
Dart Pro Sportsman Block with Prep 4.125 Bore
Trick Flow Series R 235 Outlaw Heads by TEA Flow 377cfm @ 800
Eagle 4340 4.100 Crank
Eagle 4340 6.200 H-beam Rods
Diamond Custom 13 to 1 Pistons
Trick flow Pushrods
Trick Flow 1.6 Roller Rockers
Comp Pro Magnum Roller Lifters
Trick Flow Stud Girdles
Eldebrook Yates Style Intake for 4500 Carb
1050 CFM Dominator
Jesel Belt Drive
Comp .749 Solid Roller by Bennet Specs
Complete Stud Kit
Canton Stroker Oil pan
MSD Pro Billet Distrib
JW The "WheeL" flywheel
ATI Fluid Damper
CSI WaterPump
Afco radiator
Aeromotive A2000 Fuel System
10an Supply
NOS Big SHot Plate System
I will take $21,000 Turnkey as it sits
I will Take $16,500 for the car with my spare 408w motor in it Running 9.60's
I will Take $9,000 for car Minus, Motor, Tranny, Fuel, and Exhaust
I will trade for other Mustangs, Lightnings, Lifted Trucks, or maybe others?
Car is located in Richmond, VA
Contact: Richard [email protected] or 804-986-7353
This is not junk and I wont trade for junk either.
