New Pics!!!
Considering selling my supercharged 1993 Mustang. Will consider trades for a Fox coupe/notch Mustang and cash.
Asking $12,500.
Mustang mods:
ENGINE
-P1SC Supercharger 9 LBS of boost (also have a 14 LB pulley)
-2-Core Intercooler
-AFM Powerpipe
-Trickflow Twisted Wedge Heads
-Trickflow Trackheat Intake
-E-303 Cam
-1.6 Ford Motorsports Roller Rockers
-Less than 7000 miles since rebuild on motor
-Professional Products Harmonic Balancer
-BBK 70MM Throttle Body
-42 LB Injectors
-Upgraded Inline Fuel Pump & FPR
-PRO-M 75MM Mass Air Meter
-SCT Flip Chip
-180 Degree Thermostat
-Daul electric fans (updgraded since pics were taken)
-MSD plug wires, MSD cap/rotor, MSD Coil, upgraded ignition module
-130 AMP Alternator
-Griffin 3 Core Radiator 31X19
-BBK Longtube Headers
-BBK Offroad H-pipe
-Flowmaster 40 Series Catback Exhaust w/ Chorme Tips
-Ford Racing Valve Covers
-Battery Relocated to Rear
-New Optima Red Top Battery
-A/C has been removed
TRANNY & REAR
-SPEC Stage 3 Clutch
-PRO 5.0 Shifter
-Liberty T-5 rebuilt to handle 650 HP
-Ford Motorsports Aluminum Driveshaft
-Driveshaft Loop
-US Alloy 31 Spline Axles
-Eaton Posi Differential
-Ford Racing 3.73 Gears
-Rear End Girdle
SUSPENSION & STEERING & BRAKES
-Granatelli Upper & Lower Control Arms
-Cobra Front Calipers & 13" Rotors with Speed Bleeders
-Stainless Steel Front Brake Lines
-5 Lug Rear Drums
-Subframe Connectors
-BBK Lowering Springs
-BBK CC plates
-Upgraded KYB Struts/Shocks
-245/45/17 Front Kumho Tires, 275/40/17 Rear Nitto Drag Radials
EXTERIOR
-Chrome 17x8 & 17x9 Bullitt wheels
-Cervinis Fiberglass Ram Air Hood
-Custom Carbonfiber Painted Cowl Pannel
-Tinted Window
-Shorty Anntena
INTERIOR
-EL-GLO White Face Gauges
-Autometer Phantom Boost, Fuel Pressure, Air/Fuel, Water Temp Gauges
-Black Interior
-1995 cloth Cobra seats
-Rear Seat Delete
-Pioneer CD player
-Aluminum Battery Box in Hatch
--Not yet installed--
Crane Digital Ignition & Coil
2 Extra 17x8 Bullitt Wheels
BBK Catted H-pipe
Offset Poly Steering Rack Bushings
Poly Sway Bar Bushings
Taylor 10mm Plug Wires
Phantom Oil Pressure Gauge
Phantom Voltmeter Gauge
Shift Light
Also have rear Cobra calipers & 11.65" rotors and sn95 master cylinder
Wheels in pics are gone. Has chrome Bullitts to go on now.
AFM Powerpipe has been added since this dyno, car should easily be making over 450whp & 450wtq now.
Considering selling my supercharged 1993 Mustang. Will consider trades for a Fox coupe/notch Mustang and cash.
Asking $12,500.
Mustang mods:
ENGINE
-P1SC Supercharger 9 LBS of boost (also have a 14 LB pulley)
-2-Core Intercooler
-AFM Powerpipe
-Trickflow Twisted Wedge Heads
-Trickflow Trackheat Intake
-E-303 Cam
-1.6 Ford Motorsports Roller Rockers
-Less than 7000 miles since rebuild on motor
-Professional Products Harmonic Balancer
-BBK 70MM Throttle Body
-42 LB Injectors
-Upgraded Inline Fuel Pump & FPR
-PRO-M 75MM Mass Air Meter
-SCT Flip Chip
-180 Degree Thermostat
-Daul electric fans (updgraded since pics were taken)
-MSD plug wires, MSD cap/rotor, MSD Coil, upgraded ignition module
-130 AMP Alternator
-Griffin 3 Core Radiator 31X19
-BBK Longtube Headers
-BBK Offroad H-pipe
-Flowmaster 40 Series Catback Exhaust w/ Chorme Tips
-Ford Racing Valve Covers
-Battery Relocated to Rear
-New Optima Red Top Battery
-A/C has been removed
TRANNY & REAR
-SPEC Stage 3 Clutch
-PRO 5.0 Shifter
-Liberty T-5 rebuilt to handle 650 HP
-Ford Motorsports Aluminum Driveshaft
-Driveshaft Loop
-US Alloy 31 Spline Axles
-Eaton Posi Differential
-Ford Racing 3.73 Gears
-Rear End Girdle
SUSPENSION & STEERING & BRAKES
-Granatelli Upper & Lower Control Arms
-Cobra Front Calipers & 13" Rotors with Speed Bleeders
-Stainless Steel Front Brake Lines
-5 Lug Rear Drums
-Subframe Connectors
-BBK Lowering Springs
-BBK CC plates
-Upgraded KYB Struts/Shocks
-245/45/17 Front Kumho Tires, 275/40/17 Rear Nitto Drag Radials
EXTERIOR
-Chrome 17x8 & 17x9 Bullitt wheels
-Cervinis Fiberglass Ram Air Hood
-Custom Carbonfiber Painted Cowl Pannel
-Tinted Window
-Shorty Anntena
INTERIOR
-EL-GLO White Face Gauges
-Autometer Phantom Boost, Fuel Pressure, Air/Fuel, Water Temp Gauges
-Black Interior
-1995 cloth Cobra seats
-Rear Seat Delete
-Pioneer CD player
-Aluminum Battery Box in Hatch
--Not yet installed--
Crane Digital Ignition & Coil
2 Extra 17x8 Bullitt Wheels
BBK Catted H-pipe
Offset Poly Steering Rack Bushings
Poly Sway Bar Bushings
Taylor 10mm Plug Wires
Phantom Oil Pressure Gauge
Phantom Voltmeter Gauge
Shift Light
Also have rear Cobra calipers & 11.65" rotors and sn95 master cylinder
Wheels in pics are gone. Has chrome Bullitts to go on now.
AFM Powerpipe has been added since this dyno, car should easily be making over 450whp & 450wtq now.
Last edited:
