- Joined
- Jul 14, 2002
- Messages
- 9,444
Well I'm throwing this thing up for sale. This car has SO MUCH time and effort into it and I can say it has paid off. I have just lost interest in this car since my father passed. It was our project and I don't feel like going further with it. Here is my old build thread which is still 100% accurate except for the UPPER intake and cam. EVERYTHING else is the same! With the regular R intake and 274HR cam it made 418rwhp. With the box intake and N91 cam it made 456rwhp with still some on the table. Pics of project 400rwhp N/A stock block 331 | Mustang Forums at StangNet
The car DOES NOT buck or surge at all, all the way down to 1200rpms in 6th gear!
[youtube_browser]r3H372UQIcQ[/youtube_browser]
Here is a WOT vide of it.
[youtube_browser]wQwh_jbUb_c[/youtube_browser]
This motor is a cam swap and upper intake away from 456rwhp and 7,000rpms with no chance of valve float. I can get dyno sheets up of either setup if wanted! The car does not have a transmission in it Looking to get $5000 for it just to get it out of my driveway. PM me with any questions you might have.
The car DOES NOT buck or surge at all, all the way down to 1200rpms in 6th gear!
[youtube_browser]r3H372UQIcQ[/youtube_browser]
Here is a WOT vide of it.
[youtube_browser]wQwh_jbUb_c[/youtube_browser]
This motor is a cam swap and upper intake away from 456rwhp and 7,000rpms with no chance of valve float. I can get dyno sheets up of either setup if wanted! The car does not have a transmission in it Looking to get $5000 for it just to get it out of my driveway. PM me with any questions you might have.
Last edited by a moderator: