Stage 2 ported B heads with Comp Beehive springs, Comp steel retainers, stock valves, stock valve guides. Mileage is unknown, no flow numbers. Rockers and lash adjusters are NOT included. Cams are NOT included.
I bought these heads from user "91SVTCoupe" on here back in March. Here is the for sale thread that I bought them from:
http://www.svtperformance.com/forum...007-96-98-b-head-combo-cams-ported-heads.html
I have not bolted these heads up to an engine. I only removed the cams and cleaned up the heads in a parts washer because I do not like selling dirty/greasy parts. I plan on using the cams for my build.
When I disassembled the heads for cleanup, I found that three of the 8 cam caps had cracks in the "rib" area of them. Of the three, two of them are for the exhaust cam on the drivers side head, the third cap with a crack in the rib is for the exhaust cam on the passenger side head. As stated by a few people on here who are very knowledgeable about this, the cracks DO NOT in any way effect performance. There are NO cracks in the cam journal areas, only the ribs which connect the cam journals together in the cam cap. A picture of this is shown below. The cracks are near the gold bolts.
I'm selling these heads because soon after I bought them, I found a fully built set of heads with all of the parts that I wanted already installed.
Current pictures:
Price is $700 plus shipping/Paypal fees. If you reallllllly want the stock rockers and stock lash adjusters, add $125 for the set of 32 as they have also been cleaned up and the rockers themselves look very nice.
Shipping can be estimated at about $100 for the pair of heads. They will be shipped in separate boxes. They will be shipped in the same packaging that user "91svtcoupe" shipped them to me in.
I bought these heads from user "91SVTCoupe" on here back in March. Here is the for sale thread that I bought them from:
http://www.svtperformance.com/forum...007-96-98-b-head-combo-cams-ported-heads.html
I have not bolted these heads up to an engine. I only removed the cams and cleaned up the heads in a parts washer because I do not like selling dirty/greasy parts. I plan on using the cams for my build.
When I disassembled the heads for cleanup, I found that three of the 8 cam caps had cracks in the "rib" area of them. Of the three, two of them are for the exhaust cam on the drivers side head, the third cap with a crack in the rib is for the exhaust cam on the passenger side head. As stated by a few people on here who are very knowledgeable about this, the cracks DO NOT in any way effect performance. There are NO cracks in the cam journal areas, only the ribs which connect the cam journals together in the cam cap. A picture of this is shown below. The cracks are near the gold bolts.
I'm selling these heads because soon after I bought them, I found a fully built set of heads with all of the parts that I wanted already installed.
Current pictures:
Price is $700 plus shipping/Paypal fees. If you reallllllly want the stock rockers and stock lash adjusters, add $125 for the set of 32 as they have also been cleaned up and the rockers themselves look very nice.
Shipping can be estimated at about $100 for the pair of heads. They will be shipped in separate boxes. They will be shipped in the same packaging that user "91svtcoupe" shipped them to me in.
Last edited:
