Selling off all the parts I was saving for my build to fund my dragbike. I have too many pictures to post and there are far too many details to cram into this one thread so if you are interested in any of these parts please PM me and I will be happy to answer any specific questions and provide more photos. Prices do not include PayPal fees or shipping. Local pickup preferred but I will ship for actual shipping costs. Never shipped a block before so I will have to figure out how to make that happen.
Here is a list and short description of what I have along with some pictures.
1996 Cobra Intake and Exhaust Cams in a fresh set of B-Heads. Cleaned, pressure tested, and gasket cut .0005". Ready to be bolted on $500
1996 Cobra Upper and Lower Intake manifold with factory throttle body complete with all gaskets (used) - $400
Cobra factory exhaust manifolds and EGR pipe - $100
**SOLD Teksid Block from 1996 Cobra .020" over. Machine work 100% complete including finish hone with torque plates, align honed, .0005" skim cut on deck (gasket cut). ARP2000 main studs (part # 256-5701) and ARP2000 side bolts installed. Bolts only installed for align hone and boring/honing cylinders. Ready for final cleaning and assembly - **SOLD
**SOLD Forged Cobra 8 bolt crank. 30,000 miles crank. Main and rod journals STANDARD size. Magnafluxed, polished and ready to use. Pristine journals - **SOLD
**SOLD ARP2000 Head Studs, washers, and 12 point nuts (part # 256-4201) never installed - **SOLD
Here is a list and short description of what I have along with some pictures.
1996 Cobra Intake and Exhaust Cams in a fresh set of B-Heads. Cleaned, pressure tested, and gasket cut .0005". Ready to be bolted on $500
1996 Cobra Upper and Lower Intake manifold with factory throttle body complete with all gaskets (used) - $400
Cobra factory exhaust manifolds and EGR pipe - $100
**SOLD Teksid Block from 1996 Cobra .020" over. Machine work 100% complete including finish hone with torque plates, align honed, .0005" skim cut on deck (gasket cut). ARP2000 main studs (part # 256-5701) and ARP2000 side bolts installed. Bolts only installed for align hone and boring/honing cylinders. Ready for final cleaning and assembly - **SOLD
**SOLD Forged Cobra 8 bolt crank. 30,000 miles crank. Main and rod journals STANDARD size. Magnafluxed, polished and ready to use. Pristine journals - **SOLD
**SOLD ARP2000 Head Studs, washers, and 12 point nuts (part # 256-4201) never installed - **SOLD
Last edited: