Fs/trade Balls out 03 cobra irs for built sra

Over8oosted

Member
Established Member
Joined
Oct 28, 2015
Messages
133
Location
Pa
Check it out, fully built irs from aluminum diff bushings to stage 5 axles, fore billit cover, true trac posi, motive 3.90 gear set, all delrin bushings, MM coil overs, the works. Looking for a built solid axle swap as trade or $3500 plus shipping

Axles cost 1800, let that sink in. I can pull receipts and give dates of purchase, everything is low mileage 10k and under at most
28FDB999-2514-48D6-AC61-40BC7166AF15.jpg

5F243C82-5FFE-4D38-9758-2DB6F992D07C.jpg

07DF1197-D87F-45D0-9AA7-DD981011BCA0.jpg

3E931C8E-479E-4979-9DE4-1C6EAB0C2FF8.jpg

E25E8D9A-35EC-4135-9991-63A5EA6EC454.jpg

P7270474.jpg
 

Snorky

Member
Established Member
Joined
May 23, 2010
Messages
89
Location
Oak Ridge, New Jersey
I have an SRA, 31 spline moser axles, GT500 track lock with carbon clutches, 4.10 ford racing gears, (an additional set of ford 3.55 gears and a new installation kit. Maximum motorsports HD LCA's, MM panhard bar, bassani SS catback, H&R SS springs, Koni single adjustable shocks.

Let me know your thoughts. CA. You fit 10.5 wheels and 315 tires on that without a wheel spacer?
 
Last edited:

sprayedcobro

Member
Established Member
Joined
Dec 28, 2015
Messages
37
Location
Louisiana
I have an SRA, 31 spline moser axles, GT500 track lock with carbon clutches, 4.10 ford racing gears, (an additional set of ford 3.55 gears and a new installation kit. Maximum motorsports HD LCA's, MM panhard bar, bassani SS catback, H&R SS springs, Koni single adjustable shocks.

Let me know your thoughts. CA. You fit 10.5 wheels and 315 tires on that without a wheel spacer?
you selling this rear end? looking for a built 8.8 for my 2004 cobra
 

Over8oosted

Member
Established Member
Joined
Oct 28, 2015
Messages
133
Location
Pa
Everything! Coilovers, shocks, stainless brake lines, abs sensors, brackets and ebrake cables.
I'll throw in my mangaflow catback too
 

Users who are viewing this thread



Top