full BMR rear suspension for sale. Parts where on my car for a little over 5000 miles. all parts are in mint condition minus the little BS scratches from street use. Emergency brake cable rubbed a little paint off the lower control arms where it passes through it like the factory arm. Will offer a package deal to someone buying the entire rear suspension setup. This setup will last someone the duration of there cars life and if I built another mustang I would buy the s...ame parts again. I have to sell my car as I just got a new job and have other goals. I was able to pull a 1.62 60 foot dumping the clutch on a stock rear with slicks, and stock driveshaft. I was going easy. The car pulled both wheels with the factory 19 inch rims up front. I have the picture available. these parts did there job I just needed a rear drag shock and I would have been really set!
Billet BMR lower control arms. These things are made to last a lifetime and look real nice. check there website. grease fittings at all 4 corners. $250 plus shipping
BMR upper control arm non adjustable selling in combination with BMR heavy duty upper control arm mount which has 2 mounting holes depending on the aggressiveness of your setup.Upper control arm and upper control arm mount see photos. has grease fitting and is very heavy duty will last lifetime. $ 200.00 plus shipping
BMR lower control arm relocation brackets. bolt on no welding necessary. Another heavy duty part from BMR with 3 mounting hole locations of adjustment. $ 85.00
Non adjustable panhard bar made of chromemoly. very light weight. will clear stock rearend if you ARE NOT using an aftermarket rearend cover. This is made by Spohn performance. $80 plus shipping.
BMR driveshaft loop soon out of car and available.
Billet BMR lower control arms. These things are made to last a lifetime and look real nice. check there website. grease fittings at all 4 corners. $250 plus shipping
BMR upper control arm non adjustable selling in combination with BMR heavy duty upper control arm mount which has 2 mounting holes depending on the aggressiveness of your setup.Upper control arm and upper control arm mount see photos. has grease fitting and is very heavy duty will last lifetime. $ 200.00 plus shipping
BMR lower control arm relocation brackets. bolt on no welding necessary. Another heavy duty part from BMR with 3 mounting hole locations of adjustment. $ 85.00
Non adjustable panhard bar made of chromemoly. very light weight. will clear stock rearend if you ARE NOT using an aftermarket rearend cover. This is made by Spohn performance. $80 plus shipping.
BMR driveshaft loop soon out of car and available.