Couldn't delete my old thread or edit the title so here goes another thread.
Fully Built/Fully optioned 2013 Black GT 500/ Glass Roof/flat black stripes
1000 Miles
988HP/ 960TQ 23lbs boost, Jon Lund tune
Drivetrain:
Rebuilt motor by MMR, 358 CI/ darton sleeves
Whipple 4.0
Lower intake port matched to the heads
FRPP twin 65MM TB
155MM JLT CAI
15% O/D ATI damper
MMR stage 3 head porting
Comp Cams Stage 3 cams
Manley Billet rods
Manley forged pistons/polydynne coated
MMR billet oil pump gears
FRPP crank
ARH 2 in headers, polydynne coated, no cats, magnaflow street catback
Stock H/E with dual fans
Lethal performance division x fuel rails
205LB bosch injectors for E85 only
CPE fuel hat/ #10 fuel lines/ #8 return
Speed of sound pillar with boost/fuel pressure/air fuel/ auto meter cobalt gauges
MMR external oil cooler
JLT air/oil seperator both sides
Transmission:
Fully built by RPM Transmission
Barton shifter
Aluminum D/S
Evolution billet crossmember
McLeod clutch/ Billet steel flywheel
Misc:
True forged satin black hood vent insert included- not installed
Redline hood struts
Moroso black powder coated coolant/reservoir tanks included- not installed
Lloyds aftermarket floor mats/ stock floor mats included
SVT Performance and SVT Appearance package
Recaros/Nav/stock SVT wheels/ Shaker 1000 audio package
Located in Houston area..........$70K FIRM
No trades, joy rides or tire kickers, you cannot even come close to building this car for this price
Window sticker was $69K
Over $40K invested in car
Fully Built/Fully optioned 2013 Black GT 500/ Glass Roof/flat black stripes
1000 Miles
988HP/ 960TQ 23lbs boost, Jon Lund tune
Drivetrain:
Rebuilt motor by MMR, 358 CI/ darton sleeves
Whipple 4.0
Lower intake port matched to the heads
FRPP twin 65MM TB
155MM JLT CAI
15% O/D ATI damper
MMR stage 3 head porting
Comp Cams Stage 3 cams
Manley Billet rods
Manley forged pistons/polydynne coated
MMR billet oil pump gears
FRPP crank
ARH 2 in headers, polydynne coated, no cats, magnaflow street catback
Stock H/E with dual fans
Lethal performance division x fuel rails
205LB bosch injectors for E85 only
CPE fuel hat/ #10 fuel lines/ #8 return
Speed of sound pillar with boost/fuel pressure/air fuel/ auto meter cobalt gauges
MMR external oil cooler
JLT air/oil seperator both sides
Transmission:
Fully built by RPM Transmission
Barton shifter
Aluminum D/S
Evolution billet crossmember
McLeod clutch/ Billet steel flywheel
Misc:
True forged satin black hood vent insert included- not installed
Redline hood struts
Moroso black powder coated coolant/reservoir tanks included- not installed
Lloyds aftermarket floor mats/ stock floor mats included
SVT Performance and SVT Appearance package
Recaros/Nav/stock SVT wheels/ Shaker 1000 audio package
Located in Houston area..........$70K FIRM
No trades, joy rides or tire kickers, you cannot even come close to building this car for this price
Window sticker was $69K
Over $40K invested in car
Last edited:
