Fully built black 03 cobra terminator 5.0 stroker 2.3 whipple 600hp

[esefranky]

Selling my 2003 Cobra Terminator
Clean title In HAND!!!!!
Car is clean with 32,000 miles. Motor was built at 25,000 miles and runs awesome. Balanced and blueprinted stroker built by Heath at Modular Madness West. Built to handle 1200+hp. Have all the documents to go along with motor and the build of the car. No expense was spared. Car does have a nitrous kit but I have never used it. Original owner used it once or twice in salt lake at the track and the car ran a 10.2 @ 139 @5500ft elevation. Car makes 652.8hp at the wheels on all motor and over 800hp with the nitrous.


Engine Specs:
5.0 stroker (balanced and blueprinted)
Bored .20
Kellog Stroker Crank 3.75
Manley Billet i-beam rods
Manley forged Pistons
Stainless Valves
ALL ARP hardware main and head studs.
New oil pump
Moroso deep oil pan 9qt capacity
JLT high boost Intake
LDC Head Cooling Mod
60lb injectors supplied by CPR fuel rails
Big fuel line upgrade
2.3 Whipple Gen 1 (only 13lbs on current tune/pulley combo)
2 stock fuel pumps on a dual hat.
KB Boost-a-Pump
BBK Ceramic Coated Long Tube Headers
BBK High Flow Catted X-pipe
Flowmaster 2 1/2"
LFP Heat exchanger
Crome Valve Covers
Innovators West balancer
Accufab Single Blade Throttle Body
Stand alone nitrous kit 100 shot. Motor was built to handle nitrous. Can go with a bigger kit if you want I have never used it.
Billetflow 100mm idlers
Bigger Alternator Pulley
LFP overflow tank
Trans and rear end:
stock t56
26 spline input shaft
Spec 3+ clutch and flywheel
Mcleoud Throw out bearing
MGW Short throw Shifter
3.73 gears (just installed in January)
LPW diff cover
Full length welded subframe connectors
Driveline Hoop
Kenny Brown rear suspension upgrades
Poly bushings
DSS lvl 5 half shafts (recently sent back rebuilt and upgraded to newer style)
Billet hubs with extended Moroso Wheel Studs
SLP line lock
Steeda adjustable clutch quadrant
Exterior:
17x9 in the front with brand new tires
17x10 in the rear with 315 Nittos
Carbon Driven Carbon Fiber Side skirts. Had plans to do the spoiler too but ran out of time.
Polished Exhaust (needs a touch up)
interior:
5 autometer lunar series: Oil Pressure, boost, AFR, water temp, fuel pressure.


Car comes with original certificate and letters from SVT!


Asking $30,000 OBO


CONTACT ME AT (775)720-1735 AS I RARELY GO ON HERE!

[/URL][/IMG]

[/URL][/IMG]

[/URL][/IMG]

[/URL][/IMG]

[/URL][/IMG][/IMG]

[/URL][/IMG]

[/URL][/IMG]

[/URL][/IMG]

[/URL][/IMG]

[/URL][/IMG]

[/URL][/IMG]

[/URL][/IMG]

[/URL][/IMG]

[/URL][/IMG]

[/URL][/IMG]

[/URL][/IMG]

[/URL][/IMG]

[/URL][/IMG]

[/URL][/IMG]

[/URL][/IMG]

[/URL][/IMG]

[/URL][/IMG]

[/URL][/IMG]
[video=youtube;_HS5XQCKMrw]https://www.youtube.com/watch?v=_HS5XQCKMrw[/video]

 

[tarheels15]

So if im reading correctly its making 652rwhp on 13lbs with a 302 stroker on stock heads and cams? Or is it making less power on 13lbs? If thats on 13lbs damn you made great numbers.

 

[esefranky]

So if im reading correctly its making 652rwhp on 13lbs with a 302 stroker on stock heads and cams? Or is it making less power on 13lbs? If thats on 13lbs damn you made great numbers.

yes thats what it made when it was tuned

 

[tarheels15]

Very impressive on 13lbs with those heads and cams. Nice set up and glws

 

[esefranky]

Very impressive on 13lbs with those heads and cams. Nice set up and glws

Thanks alot man.

 

[esefranky]

[video]https://youtu.be/qQ4sBhYepjs[/video]

[/URL][/IMG]

[/URL][/IMG]

[/URL][/IMG]

[/URL][/IMG]

[/URL][/IMG]

[/URL][/IMG]

[/URL][/IMG]

[/URL][/IMG]

[/URL][/IMG]

 

[esefranky]

Bump

 

[esefranky]

bump

 

[esefranky]

A lil photo shoot...

[/URL][/IMG]

[/URL][/IMG]

[/URL][/IMG]

[/URL][/IMG]

 

[Venimus03]

Well on that note, I'll take it! ;-) GLWS :beer:

 

[shauncurt]

WOW! Beautiful

 

[Fdnyshelby]

Wow she bad

 

[need_a_foxbody!]

Who is that model bro....she bangin'! Post her instagram.