Gear pattern

Bullitt1448

Well-Known Member
Established Member
Joined
Sep 16, 2013
Messages
2,038
Location
Somewhere
Limited (very) experience with gear set up so looking to see if this gear pattern looks ok, seems good to me by looking at the charts online but would like confirmation/critique from others out there. Backlash is .009. All comments welcome
 

Attachments

  • IMG_5598.jpeg
    IMG_5598.jpeg
    236.5 KB · Views: 78

ToddW702

Well-Known Member
Established Member
Joined
Jan 21, 2014
Messages
676
Location
TX
It looks the same as my third member that was assembled by Currie.


Sent from my iPhone using svtperformance.com
 

MG0h3

Well-Known Member
Established Member
Joined
Jul 23, 2014
Messages
14,307
Location
El Paso, TX
Looks good to me.

Done a handful of my own on various setups.

I’ve had a pattern that wasn’t quite as nice as that, went back and forth with the pinion and carrier shims and it never got better.

As mentioned, if the coast is acceptable, send it.

Edit: did you ever try a little more shallow on the pinion? Only reason I ask is I can’t tell if there’s any room at the base of the ring gear.


Sent from my iPhone using svtperformance.com
 

Bullitt1448

Well-Known Member
Established Member
Joined
Sep 16, 2013
Messages
2,038
Location
Somewhere
I didn’t try anymore shallow on the pinion, it was deeper before, I think it will be ok, the coast side looks decent too, just going to put the axles in and send it I think, tired of playing with it. I sure like the solid pinion spacer way better than the crush sleeve, never could get those right
Thanks for the feedback
 

JaCobro

Luke 10:19
Established Member
Premium Member
Joined
Apr 25, 2020
Messages
1,818
Location
North Carolina
I’d be happy with that. Looks like what my cobra irs diff did when I went to a 373 gear. So far no issues with almost 1500 miles.
 

Bullitt1448

Well-Known Member
Established Member
Joined
Sep 16, 2013
Messages
2,038
Location
Somewhere
I’d be happy with that. Looks like what my cobra irs diff did when I went to a 373 gear. So far no issues with almost 1500 miles.
Pretty happy here too, I think they will be good, these are 3.73’s as well, I thought about going 4.10’s but I don’t want to have to buy more tires than necessary
 

Users who are viewing this thread



Top