Gen3 and fuel upgrade 07 GT500

[sleek98]

On my gen 3 I am running a 2.8” and iw “stock sized” lower which ratio wise it’s like a 2.75” upper pulley only. Jon jr didn’t say anything about it when I submitted my tune update. I’m sure I will end up with a little lower timing.

 

[2011 gtcs]

I went with a 3.0 upper based on Lunds recommendation. However, I hear Lund is conservative and right now I'm happy with power. If I get bored I'll pulley down and retune.

I'm running MS100 fuel with stock injectors and a 21 volt BAP, so Lund wants to log the 3.0 first and see how my injector duty cycle is than I'll do a 2.8 and if there is more room I want to eventually do a 2.6. The goal is 800whp.

 

[sleek98]

Looks great.

 

[RBB]

Nice power. That's a lot of boost for 93 octane....

 

[sleek98]

Hes on E85

 

[RBB]

Hes on E85

I must have missed him saying that. Those #s seemed awfully high for 93 as well.

 

[Totalpkg]

I'm running MS100 fuel with stock injectors and a 21 volt BAP, so Lund wants to log the 3.0 first and see how my injector duty cycle is than I'll do a 2.8 and if there is more room I want to eventually do a 2.6. The goal is 800whp.

Im running the PMS BAP and ID1000 and colder plugs. Im surprise you didnt at least go to 13/14 injectors.

 

[Fast Ford]

Looks great.

Appreciate it, I put a lot of work in it. With the Gen3 and e85 this thing is crazy fun.

 

[ram150]

Im running the PMS BAP and ID1000 and colder plugs. Im surprise you didnt at least go to 13/14 injectors.

If I’m not mistaken his vehicle is a 13 GT500. @2011 gtcs

 

[Totalpkg]

Ahh... I thought it was a 2011.

 

[2011 gtcs]

If I’m not mistaken his vehicle is a 13 GT500. @2011 gtcs

Ahh... I thought it was a 2011.

Yeah I have a 2014 so the 56 pound injections should be ok for at least 18 to 19 psi