How hard is it to get the console out. I can get the seats I have pulled the seats out of my truck before. I just don't want to take the whole toolbox when all I need is a couple of sockets and a ratchet.
Going to look for an Expy/Navi console, but have a question.
- Thread starter x_man586
- Start date
1/4 inch ratchet. Extensions 7mm, 8mm, 10mm and 15torx sockets.
1/2 inch ratchet with 13mm & 15mm sockets. Might want to take a breaker bar just in case the bolts are rusted to the floor pan.
Seats all you need is a 55torx socket.
That is it.
1/2 inch ratchet with 13mm & 15mm sockets. Might want to take a breaker bar just in case the bolts are rusted to the floor pan.
Seats all you need is a 55torx socket.
That is it.
Thanks if I get lucky I might send you the lid for refinishing.
Well, I found a console from an 00 Expedition, but no luck finding a passenger seat. The interior was stripped. I got the console,mounting brackets and bolts. I don't suppose a driver's side seat will fit over there will it?
Contact/PM Melman. He can hook you up with a seat base. Just tell him that I sent you his way.
Oh, no a drivers seat will not work.
Oh, no a drivers seat will not work.
You are the man.
Users who are viewing this thread
