Gonna buy a Whipple Kit....What else do I need?

[tickingcobra]

When I buy the kit, what else do I need that it doesn't come with? I need a complete list of items please.. I want to go ahead and buy all of the stuff ahead of time. Roughly how much will it cost

 

[RiffRaff04]

I think you wil need: dual svt focus pumps, a new MAF or MAFXtender, maybe new injectors and a new tune. You would probably be better off talking to Linn @ Amazon, she should be able to set you on the right track. I also see your in Atl. Rick and Linn are comming to Anderson SC(2hrs straight up 85) this weekend if your interested.

 

[Silver 03 Cobra]

You'll need a KB BAP, 55-60# injectors, MAF Extender or SCT Meter, set of gaskets from Ford (a pair lower intake gaskets, blower gasket, EGR gasket, and an IC inlet gasket) and a dyno tune. Then you'll need a clutch if you are going to run 17 psi and race.

 

[Fang]

When I buy the kit, what else do I need that it doesn't come with? I need a complete list of items please.. I want to go ahead and buy all of the stuff ahead of time. Roughly how much will it cost

This is what I did:

Amazon 2.3 Whipple Blower
Amazon Pulley 3.00
Amazon 60# Injectors w/harness
Amazon Maf ext haven't got it yet
Amazon Duel focus fuel pumps
Amazon Tune
Amazon Shipping
NFS/Accufab Throttle body
Amazon NGK TR6 Plugs
Gords Heat Exchanger

For wheel hop
MM IRS Delrin control arm bushings
MM IRS Alum. Diff Mount
MM IRS Adjustable tire rod
MM Front coilovers w/350 spring rates
MM Rear coilovers w/525 spring rates
MM Castor camber plates
Billet flow Diff. brace
MM Shipping

For monitoring
Jegs Boost guage, water temp guage
Jegs Fuel pressure guage
PLX O2 sensor w/guage
Jegs Guage instrument bezel
Speed of sound A pillar guage pod

You will have to use your own judgement on what suits you in the end.

 

[RedfireBeast]

This is what I did:

Amazon 2.3 Whipple Blower
Amazon Pulley 3.00
Amazon 60# Injectors w/harness
Amazon Maf ext haven't got it yet
Amazon Duel focus fuel pumps
Amazon Tune
Amazon Shipping
NFS/Accufab Throttle body
Amazon NGK TR6 Plugs
Gords Heat Exchanger

For wheel hop
MM IRS Delrin control arm bushings
MM IRS Alum. Diff Mount
MM IRS Adjustable tire rod
MM Front coilovers w/350 spring rates
MM Rear coilovers w/525 spring rates
MM Castor camber plates
Billet flow Diff. brace
MM Shipping

For monitoring
Jegs Boost guage, water temp guage
Jegs Fuel pressure guage
PLX O2 sensor w/guage
Jegs Guage instrument bezel
Speed of sound A pillar guage pod

You will have to use your own judgement on what suits you in the end.

Good write up example the only thing I would add is the SCT MAF. Amazon did my whole package and installation as well.

 

[tickingcobra]

Ok cause I want everything I'm gonna need in order to make the power and keep it safe....I just order the clutch and fidenza flywheel along with a 2lb lower from Mark at LFP...Is the install pretty straight forward or do I need to modify anything...I'm gonna try to do it myself, I did my eaton after I got it ported (which is for sale now if anyone wants it)..

 

[primo]

buy a KB kit, it comes with everything needed. Thats what I did!

 

[Fang]

Ok cause I want everything I'm gonna need in order to make the power and keep it safe....I just order the clutch and fidenza flywheel along with a 2lb lower from Mark at LFP...Is the install pretty straight forward or do I need to modify anything...I'm gonna try to do it myself, I did my eaton after I got it ported (which is for sale now if anyone wants it)..

The only thing I can suggest is taking your time to make sure everything is right. Don't follow the directions that comes with it. I tried to but eventually ended up just asking around and taking pictures as I did it. It calls for taking off the intake manifold. Don't do it. There are ways around it. Like I said just take your time and ask questions.