Hey guys I finally went out and got the car dyno'ed this weekend. I have a 2.2 kb with a 2.93 pulley, off road x pipe, bassani catback, gt40 pumps, 60 pounders.
So I drove out to the dyno and on 16 deg it put down 550hp and 550 tq on pump gas and the air fuel was at 11.8. I put 105 in it and they moved the timing to 20deg and the hp and tg did not hardly move any ideas. I know that it was heat soaked really bad but I would have thought it would have been close to the 600 mark.
So I drove out to the dyno and on 16 deg it put down 550hp and 550 tq on pump gas and the air fuel was at 11.8. I put 105 in it and they moved the timing to 20deg and the hp and tg did not hardly move any ideas. I know that it was heat soaked really bad but I would have thought it would have been close to the 600 mark.
