They are a little too quiet, will cutting out the resonators help or will an H-pipe be needed?
Cheapest route is the H pipe first
No, cheapest route would be having a muffler shop cut out the resonators and weld regular pipes in their place. Can probably get it done for $50 and it will make it a little louder. Do that first and see how you like it.
If its still too quiet, get an off road H pipe, but keep in mind you WILL need a tune with an offroad pipe, so it ends up being pretty expensive when all said and done
or just sell em for borla S types, like I did
Thanks for clarifying that :beer:
Could also try long tubes but they are costly and not necessary unless youre going boosted.
I have a tune, intake, exhaust and am planning the long tubes before I put a blower on. Unfortunately I still have traction issues even after adding LCA's, relocation brackets, adj panhard bar and 295's. I can spin through 1-2 and half of 3rd. Upper control arm is next.
They are a little too quiet, will cutting out the resonators help or will an H-pipe be needed?
Jegs cat deletes give all the sound you need and give a healthy HP increase for very little $!!! That's what I did.
Cat deletes. $130 from jegs.