Home
What's new
Latest activity
Authors
Store
Latest reviews
Search products
Forums
New posts
Search forums
What's new
New posts
New listings
New products
New profile posts
Latest activity
Members
Current visitors
New profile posts
Search profile posts
Log in
Register
Cart
Cart
Loading…
What's new
Search
Search
Search titles only
By:
New posts
Search forums
Search titles only
By:
Menu
Log in
Register
Navigation
Install the app
Install
More options
Change style
Contact us
Close Menu
Forums
Mustang Forums
Fox Body Mustangs
gt40p heads and intake?? need advice and help..
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="cotchnobra" data-source="post: 11056062" data-attributes="member: 101027"><p>1.7 rockers should work with the e303 cam but you will definitely have to worry about valve float. I would say stick with the 1.6 rockers. Usually with a bad ring or piston you should feel some power loss. To replace valve stem seals with head on the car you will need to first take off the upper intake manifold so you can get to all the valve cover bolts. Then pull the spark plug out hook up an adapter and run compressed air to it to keep the valve from falling into the cylinder when you take off the valve sprinp. Then you can pull the valve spring off with a valve spring compressor tool which will allow you to get to the seal. Valve spring compressor can be rented from your local part store. Pop the seal off then reverse the steps. Repeat 7 more times.</p></blockquote><p></p>
[QUOTE="cotchnobra, post: 11056062, member: 101027"] 1.7 rockers should work with the e303 cam but you will definitely have to worry about valve float. I would say stick with the 1.6 rockers. Usually with a bad ring or piston you should feel some power loss. To replace valve stem seals with head on the car you will need to first take off the upper intake manifold so you can get to all the valve cover bolts. Then pull the spark plug out hook up an adapter and run compressed air to it to keep the valve from falling into the cylinder when you take off the valve sprinp. Then you can pull the valve spring off with a valve spring compressor tool which will allow you to get to the seal. Valve spring compressor can be rented from your local part store. Pop the seal off then reverse the steps. Repeat 7 more times. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Mustang Forums
Fox Body Mustangs
gt40p heads and intake?? need advice and help..
Top