GT500 wheels on 03 terminator

[Unoid]

It appears the bolt pattern is the same but the offset is different.

5x4.5" identical but the gt500 wheels have offset of 45mm vs the terminator normal 22-28mm.

What will I need to do to get the gt500 wheels to fit an 03 cobra properly?

I believe since its another 1" offset INWARD to the suspension (if I understand how offset works) That I'll need to run 1" spacers just to keep the gt500 wheel even with the current cobra wheels.. Is this right?

Any dieas on getting it to work and look good?

 

[rdsnk46]

I've seen 17in. Chrome replicas that looked horrible on a fox!

 

[FEARSNO1]

i believe you are right, i know i tried to put some wheels i had from my cobra on to the shelby and they stuck out about an inch past the fenders, so it would be opposite for u. try a spacer and it should work

 

[OsirisGT]

I got some TF wheels that were made for a Terminator sent to me by accident. They stuck out about an inch out of the fenders all the way around. Seems a spacer would be in order. Don't know if that will help.

 

[Unoid]

bump.