Header Install Help!!!!!

[svtcobra2k1]

hHey guys Im really in need of some help in instaling the headers on the cobra. First off all I need the torque specs for the header bolts. Also what is the best way to get a torque wrech in there I have all the headers on the car, just not torqued down, k member is still in the car. I can get the headers on but it is very hard to get to the bolts what do you guys recomend I do, All I need is to torque them. Oil filter, battery, and starter are off the car. Any tips that would help me would really be appreciated!!!

 

[03BLKSNAKE]

I dropped my K-member to put mine on and torque the bolts.

 

[svtcobra2k1]

alright but what were your torque specs?????thanks

 

[KBpumped03]

I don't see how you can get a torque wrench around headers especially working around the k-member. You'll have to get an 8mm box end wrench and cut it off to three inches long to get to a few of the nuts. Use the stock gaskets and the stock studs and nuts and tighten using some sense and you'll be fine.