Hellion twin turbo Raptor system now available!

[HELLION TURBO]

Press release: Twin turbo Ford Raptor/6.2L F150 system

Need more power from your Ford truck? Hellion has released its twin turbo system for the 2011-2014 Raptor/6.2 F150. The completely stainless steel turbo system installs easily with no modifications and is available as a turn-key kit—including the ECU tune. The system comes standard with twin Precision 62mm turbos, and 64mm turbos are available as an upgrade. The 7 psi setting will make over 650 hp at the engine with stock cats/stock exhaust, and the system is capable of supplying up to 1,200 hp—try that with a twin-screw! Call Hellion today for maximum performance. Introductory pricing starts at $8995.
505-873-4670

 

[mechanicboy]

How much will the stock bottom end handle on the 6.2? Any special tools needed like for the oil system?

P.S. You saying the 4.2 blower can't make 1200hp?

 

[HELLION TURBO]

We have seen trucks at 11 psi making over 630 rwhp with a stock bottom end. This is over 780 hp at the engine. We send the system out with a 7 psi base setting, and have seen very good reliability. No special tools are needed, everything is included to install the kit.

As far as horsepower potential, a base Hellion system, with the base 62 mm turbos, can be adjusted from 3 psi which makes almost 550 hp at the engine, to over 25 + psi which will make over 1500 hp at the engine. All can be done with a boost controller from inside the cab of the truck. Hope this helps. Please let us know if you have any other questions. 505-873-4670.

 

[hi-rev]

any thoughts of making a twin turbo kit for the 5.0 coyote trucks

 

[SteveG@Lethal]

We just recently installed and tuned one on one. it was a bone stock Raptor too. All we added was NGK spark plugs, FRPP 47lb Injectors and the Twin Turbo kit. On stock exhaust it made 630rwhp on 11psi. More information will be posted shortly by SVTP's editor.