Help with Axles

[jn2]

So my car was involved in a collision, the other driver is at fault and his insurance is taking care of the bill.

The issue is my driver side axle needs to be replaced and they were told by local Ford dealer the part is out of stock and on national back orders. What I am trying to find out is can we use the following axles on my specific car.

2013 Ford Mustang 5.0 6spd manual
- Track Pack eqquiped(3.73 rear dif)

SR performance:
http://www.americanmuscle.com/srperformance-31spline-5lug-axles-0514.html

From what I've read the shop can just press out the old ABS wheels, or I can pick up new ones from LMR

https://lmr.com/item/LRS-2189CA/2005-2014-mustang-rear-axle-abs-ring

Question on the ABS wheels is, do I need 2?

 

[03Sssnake]

I would opt for the Mosers, forget the SR stuff, I suspect its all made in china or elsewhere overseas. There are ABS rings on both pass/driver side axles, would replace them both.

 

[03Sssnake]

You will also need to get new wheel studs if you go with the mosers.

 

[jn2]

Thanks for the update, I did look into it, they are going to order new ABS rings for both axles. We are waiting to hear back from Geico, the axle wasn't part of the original estimate, so we need to run the new costs by them

 

[Don's Bolt]

You will also need to get new wheel studs if you go with the mosers.

I run Moser axles, I didn't have to replace the wheel studs

 

[blackbeast12]

Oem replacements at decent prices:

http://www.speedconcepts.net/product_info.php?products_id=728

 

[JDos1]

Oem replacements at decent prices:

http://www.speedconcepts.net/product_info.php?products_id=728

Have you ever bought from them? Not horrible prices.