I've got a YSi setup coming my way. The bracket is made to mount on my setup (navigator 4V DOHC timing cover). I am going to be running this blower non -intercooled (E85 car) with a small amount of boost.
Where should my MAF go? Where should I mount the bypass/bov and which should I buy?
Can I mount the maf in the discharge pipe (BA3000), and have the bov before it? Then run an air inlet w/ a filter off the blower?
Specs:
12:1 Compression
E85
367ci 4v
Race ported GT Supercar heads
big cams
big longtubes w/ 3" exhaust
7500rpm (shifting at 8K)
7.5" runner intake
10% o/d innovators west damper
Forged.
Thanks in advance for the advice :beer:
Where should my MAF go? Where should I mount the bypass/bov and which should I buy?
Can I mount the maf in the discharge pipe (BA3000), and have the bov before it? Then run an air inlet w/ a filter off the blower?
Specs:
12:1 Compression
E85
367ci 4v
Race ported GT Supercar heads
big cams
big longtubes w/ 3" exhaust
7500rpm (shifting at 8K)
7.5" runner intake
10% o/d innovators west damper
Forged.
Thanks in advance for the advice :beer: