High Fuel Pressure After Pump Upgrade

[toddyfiveo]

I had a pump going bad so I ditched the factory pumps w/ BAP and installed black306 pumps and modified FPDM with wire upgrade. Prior to the upgrade my fuel pressure was right around the factory 39psi according to my aeroforce guage. Now the pressure sits around 55-57psi after the install. Nothing else was changed, is a retune needed to adjust the fuel pressure? It drives fine, I am just concerned on the higher fuel pressure over time.

 

[blownfox]

I might be wrong but I'm pretty sure when upgrading pumps and FPDM you need to be retuned for the new setup.

Sent from my SM-G920P using the svtperformance.com mobile app

 

[SVT_Troy]

You need to have your tune looked at. Black306 modifies FPDM’s, never heard of pumps by him.


Sent from my iPhone using svtperformance.com

 

[toddyfiveo]

You need to have your tune looked at. Black306 modifies FPDM’s, never heard of pumps by him.


Sent from my iPhone using svtperformance.com

He sells 340s » 340LPH Fuel Pumps Black306.com



Sent from my iPhone using the svtperformance.com mobile app

 

[SVT_Troy]

He sells 340s » 340LPH Fuel Pumps Black306.com



Sent from my iPhone using the svtperformance.com mobile app

Interesting, never knew that. Thanks


Sent from my iPhone using the svtperformance.com mobile app