• Welcome to SVTPerformance!

Holley Systemax

Discussion in 'Fox Body Mustangs' started by Dbrd_5.0, Sep 7, 2018.

  1. Dbrd_5.0

    Dbrd_5.0 Member Established Member

    Messages:
    40
    Joined:
    Sep 3, 2016
    Location:
    Corpus Chrisi,Tx
    What’s up guys. This is my first time running a Holley Systemax intake manifold on my fox, bought it used, just need somebody’s input, I bolted on the lower it’s ready to go. Now the upper I’m missing the bolts. Is it possible to run studs? Or what size bolts should be used, any advice would be appreciated ....
    IMG_1498.JPG


    -DrtyBrd_SVT
    ~ISR~
     
  2. Dbrd_5.0

    Dbrd_5.0 Member Established Member

    Messages:
    40
    Joined:
    Sep 3, 2016
    Location:
    Corpus Chrisi,Tx
    IMG_1221.jpg the ole fox


    -DrtyBrd_SVT
    ~ISR~
     
  3. SVT-Cobra-1993

    SVT-Cobra-1993 New Member Established Member

    Messages:
    11
    Joined:
    Dec 28, 2018
    Location:
    watertown ct
    You can try your factory bolts for the other 2 or three. The ones in the groove need the stud and thin nut and the one on top is a specialty pan head allen. I have used a regular head bolt on the long one when running a phenolic spacer. No reason you couldnt stud all of them but no real need if you have something that works. Nice intake by the way and your car looks great too, love the classic look of Welds and the new 5.0 badges! Good Luck with it.

    Mike
     

Share This Page