My right fog light has a little water in it. How do I remove the water that's in the light housing?
How do I remove the water in my fog light?
- Thread starter Joes 2003 SVT
- Start date
1. take the fog lamp assembly out of the bumper.
2. fix the leak, should be obvious when you get the lamp out.
3. bring lamp assembly inside, clean it up and let it dry out.
4. once it is dry and free of any buildup inside the housing, reinstall it and wash the car to see if it still leaks.
If you did the job right, your light won't leak anymore.
My headlight seal had a small tear in it a while back and the headlight filled up with water when it rained. I pulled the headlight out and had it fixed in just a few seconds.
2. fix the leak, should be obvious when you get the lamp out.
3. bring lamp assembly inside, clean it up and let it dry out.
4. once it is dry and free of any buildup inside the housing, reinstall it and wash the car to see if it still leaks.
If you did the job right, your light won't leak anymore.
My headlight seal had a small tear in it a while back and the headlight filled up with water when it rained. I pulled the headlight out and had it fixed in just a few seconds.
Thanks maverick, I'll try this. 
Users who are viewing this thread
