hey guys i was just wanting someone else's thoughts on how they would achieve 350 maybe more upwards towards 400 hp naturally aspirated on a 4.6L and what kinda $$$ it would cost and best place to buy the parts to do it! thanks.
In a 2v your going to need very aggressive heads, cams, and intake manifold to even get close. Even then your still going to be hoping your cars a freak. Nitrous is not N/A, it's a power adder so that takes that out of the equation. Now if we're talking rebuilding the 2v, you could always raise the compression that would be the best way to make more N/A power. There's also the option of going to E85 so you could run a lot more timing which would help, but at this point your just spending the money stupidly. The reason you don't see N/A 2v's making this kind of power is because for the same price you could have a blower. Is your goal 350 to the wheels N/A?
That is my bullitt being talked about in the previous post, and yes, I need a new intake, but I am kinda have a hard time deciding, this car is a daily driver, and I don't want to kill the low end. Seems like every intake I look at will kill it down low. Also, we had a gt leave our shop with 355 to the wheels with a stock 01 cobra aluminum shortblock, tfs heads and vt stage 2 cams through an auto.