How to pull driver side valve cover

[Nicwitha99]

Hey guys, I just picked up some powder coated valve covers and im looking to do the swap. Can anyone give me some direction on how to remove my driver side valve cover?...The motor is still in the car and I really don't want to mess with the brake booster and master cylinder
if I don't have too. I would rather drop the k member, or jack the motor up. Just looking for any insight on easier methods of getting it out.

After reading some stuff, it sounds like if i loosen the drivers side motor mount nut, jack the motor up, remove the mount from the engine and set it back down, that may drop it enough to clear the brake booster. Any thoughts?

 

[Woody6799]

http://www.svtperformance.com/forums/showthread.php?677968-Valve-Cover-Removal

 

[Nicwitha99]

yeah this is definitely a good write up...I'm really trying to avoid removing the booster, and master cylinder....If you find any info on that could you send it my way

http://www.svtperformance.com/forums/showthread.php?677968-Valve-Cover-Removal

 

[Tabres]

You'd probably be better off asking this in the 99/01 Cobra section, as this is the SN95 section. The processes are different because of the booster. SN95 cars the covers come right off on the drive's side without having to touch anything.

 

[venom1997]

My b heads seem to be able to come off without any problems

 

[venom1997]

May be a 99+ issue

 

[Nicwitha99]

Sorry guys...My mistake posting in the SN95 cobra section...Thanks for the help!