Does anyone know the benifits to installing to a sullivan intake? HP increase and Torque increase?
HP increase with Sullivan intake?
- Thread starter schef
- Start date
Well, there is no Sullivan intake for B heads (96-98) Cobras, but there may be sometime in the future. There is a Sulivan for 99/01 and 03/04 heads but you will be hard pressed to find anyone that has one installed on a street car as most think it kills too much low end power.
I have a Sullivan and should be able to give you some dyno numbers in the next few weeks. I know what it is capable of and that is why I chose it over the other intake options. My engine combination is in my Sig.
I see that you have 3.73 gears and only 9 to 1 compression. Are you planning to go FI? If the answer is no, you need a lot more gear before you changing the intake.
I have a Sullivan and should be able to give you some dyno numbers in the next few weeks. I know what it is capable of and that is why I chose it over the other intake options. My engine combination is in my Sig.
I see that you have 3.73 gears and only 9 to 1 compression. Are you planning to go FI? If the answer is no, you need a lot more gear before you changing the intake.
Im planning on a vortech... however the Hellion turbo kit isnt outta the question either
What heads do you have now? It's possible to make 700rwhp with a stock 96-98 or 99/01 intake.
Last edited:
I got a set of stock b heads but I;m planning on buying another set of heads and build those up with hi-po stuff
Your intake choice is limited to the stock piece. If you make it into a short runner you can pick up about 20rwhp and 0 tq.
Users who are viewing this thread
