HP Solutions Drag radial Mach1 Build.

[2bscrewed]

For those of you that don't venture into the pics section here very often. Thought I would share our local shops DR car build.

Heres the thread.
http://www.svtperformance.com/forum...9/738422-hp-solutions-project-sonic-boom.html

This is one of our shop cars we started building a couple weeks ago. It is a 2003 Mach 1 that will be setup for the NMRA/NMCA. Also will do some x275 racing.

 

[2bscrewed]

The rearend just came in, we still have to put the anti-roll bar mounts and wheelie bar mounts on.

The wishbone and the lower control arms.

Installed the tires on the beadlocks today, man what a pain. The tires are 275 Hoosiers. Also received the double rear caliper brake set from strange.

Hung the front Santhuff struts as well as the front Calipers

Lowered the cage down to get some paint on the top of the cage and on the lower bars under the car. Tomorrow we will be mounting the S boxes and putting the X's in. Then it will almost be ready for the 25.3 cert.

Thanks
Josh

 

[Allen2001GT]

Looks badass. Hope to see it out there next year!