if i put 17x10.5 in rear do i need to do any mods

[sb03cobra]

I'm running the 10.5's/315 M/T's with a 1/4 inch spacer and button head bolts.

BTW the 315 BFG is almost a 1/2 wider than the 315 M/T.

 

[ViciousJay]

I'm running the 10.5's/315 M/T's with a 1/4 inch spacer and button head bolts.

BTW the 315 BFG is almost a 1/2 wider than the 315 M/T.

which M/T's the 315's or 275's???

 

[Top_Fuel]

If I put 17x10.5 cobra rims on the back to I need to do any modifications.

This post should help explain the issues involved when installing 10.5" Cobra replica wheels on a Terminator...

Everything you need to know about installing 10.5" Wheels on a Terminator

 

[DarkShadowSnake]

thanks for that link...it was very helpful

 

[DaveHutch]

is lethalperformance's replica wheels the same offset? ive heard you can run a 315 BFG with no spacer and its fine with their wheel

 

[mike302]

I run 17s in a 315 eagle F1 GS D3 with spacer and I don't have any problems, I also have a buddy that has 18s on 335 Nittos with spacer with no problems "it just rubs a lil with outer fender when he rides 3-4 ppl deep"

 

[StillIntense]

No problems here. HRE 545s with BFG 315/35-17s, low profile IRS bolts; NO spacer.

 

[JMD0346]

I run 10.5's with BFG DR's. I use a 1/8th spacer and I ground down the IRS mount bolt. Anymore spacer than that looks like crap IMHO.

 

[P49Y-CY]

fwiw as i didn't see it mentioned anywhere in this thread

the potential for rubbing the irs bolt is not usually evident on a loaded suspension even with the wider 315's on the commonly available 10.5's

from what i understand it gets closer to rubbing when the car is at full jounce (ie: going over train tracks at speed)