info on Substituting newer seat track to replace older

[BobL]

I have a 1998 Mustang Cobra SVT Convertible

Its drivers seat looks and feels like you sitting in a bucket. My wife is 5’1”, so I need to move the track closer, but first I have found a 2003 drivers side power seat track and have purchased the switch to operate it. That’s the easy part, The problem arises from electrical not matching. Any ideas on what to either do or things to watch for would be greatly appreciated from my very knowledgeable Mustang friends…

Merry Christmas Guys

Bob Lohr

 

[98 svt]

There is definitely a write up on swapping Terminator seats into an SN95. It will show you all the wiring details etc.

 

[BobL]

There is definitely a write up on swapping Terminator seats into an SN95. It will show you all the wiring details etc.

Thanks. I have a 98 SVT and switching it to a 2003 model. Where would I start looking for the wiring guide? Still very new to working on cars…..ty

 

[98 svt]

Installing 03-04 Cobra Seats in SN95

I have seen a few people lately asking how to do this. This is absolutely as easy as can be, even for the novice. Extra care MUST be taken when removing the old and putting in the new seats so as not to scratch/gouge the console and door sills, and the 04s are noticeably heavier than the SN95s...

www.svtperformance.com